Sensor JSON Post stops after a few hours



  • Re: Serial to UART POST JSON

    My sensor runs for a few hours and stops with following error.

    0_1522053912470_7c3b39d0-4fd8-4c9f-b4b1-4261824a4a98-image.png ![alt text](image url)

    Could anyone please direct me as to where I might be going wrong please find code below

    import network
    import time
    import pycom
    import machine
    import gc
    import urequests
    
    from network import WLAN
    
    execfile('/flash/Wi-Fi/Wi-Fi.py')								
    
    f_device = open('/flash/Config/Device_Details.txt', 'r')     	
                                                                    
    device_setting = f_device.readline()
    device_strings = [i.strip() for i in device_setting.split(',')]
    f_device.close()
    
    
    
    gc.enable()
    pycom.heartbeat(False)
    uart1 = machine.UART(1, baudrate=9600, bits=8, parity=None, stop=1)
    time.sleep(2)
    
    while True:
    
        tmp = uart1.readall()
    
        res = urequests.post('https://mywebsite', json={'Weight': str(tmp)})
        res.close()
        if (res.status_code - 200) < 100: # check that response code is in the 200 range
            print("Weight POST Successful")
        else:
            print('there was some error')
        gc.collect()
        print(gc.mem_free())
        time.sleep(57)
    


  • @jimpower ok, so why do you get no module found when you call urequests.post now when you didn't before.
    I can't see all your code, just snippets. The vaious sample bits of code are being changed.

    Oh I see now what the problem is, when you import urequests you are importing as requests hence the module not found error.

    You will need to change the sample to requests.post

    Also as an aside why do you execfile('/flash/Wi-Fi/Wi-Fi.py') rather than importing. This seems odd thing to do.



  • @timh

    yes

    import network
    import time
    import pycom
    import machine
    import gc
    import urequests as requests

    from network import WLAN

    #INITIALISE LAN
    execfile('/flash/Wi-Fi/Wi-Fi.py') # connect to wifi

    #INITIALISE DEVICE DETAILS
    f_device = open('/flash/Config/Device_Details.txt', 'r') # read device details from file
    # file format is: Device Type, Device Location ie Fridge, Workshop A, Damp Pump
    device_setting = f_device.readline()
    device_strings = [i.strip() for i in device_setting.split(',')]
    f_device.close()

    #INITIALISE LIBRARIES

    gc.enable()
    pycom.heartbeat(False)
    uart1 = machine.UART(1, baudrate=9600, bits=8, parity=None, stop=1)
    time.sleep(2)
    tmp = uart1.readall()

    is above the I just didn't include it in previous post



  • @jimpower Umm your earlier sample code shows it being imported.

    Make sure you still have

     import urequests
    

    somewhere, and it's in your deployed code.



  • @timh

    I have tried to emulate what you have done but get an error could you help me to identify

    def linkup():

        if wlan.isconnected():
    
             try:
                  usocket.getaddrinfo("https://my.website.io", 8082, 0, usocket.SOCK_STREAM)
             except OSError as e:
                  return False
             return True
    
        return False
    

    while True:

    try:
        res = urequests.post('https://my.website', json={'Weight': str(tmp)})
        res.close()
        print(str(tmp))
    except OSError as e:
        if linkup():
            continue
    else:
        wlan = WLAN(mode=WLAN.STA)
        wlan.connect(wifi_strings[0],  auth=(WLAN.WPA2, wifi_strings[2]), timeout = 5000)
        print('Wi-Fi Connecting To :', wifi_strings[0],)
        while not wlan.isconnected():
        	machine.idle()
    
    gc.collect()
    print(gc.mem_free())
    time.sleep(50)
    

    getting following error

    0_1522128315209_0beb1779-1d17-4e24-93b5-9e0569ce4cfa-image.png



  • @timh This is very rough (and to be honest not well structured) but for instance you could implement a check for connectivity, and if you get an error then try reconnecting.

    def linkup()
        
            if wlan.isconnected():
    
                 try:
                      usocket.getaddrinfo("someaddress.com", someport, 0, usocket.SOCK_STREAM)
                 except OSError as e:
                      return False
                 return True
          
            return False
    

    Then in your main loop

    try:
        res = urequests.post('https://mywebsite', json={'Weight': str(tmp)})
        res.close()
    except OSError as e:
        if linkup():
            continue
        else:
            do_something_to_reconnect()
            # if this fails then may be machine.reset()


  • @timh

    I was leaning towards this however I'm not sure how to go about the try/except block. Would you be able to help me understand how to check if wifi is still connected and also if I can resolve name as wifi could be good without active internet access.



  • @jimpower I would suggest you wrap that call in a try/except block. Catch the exception.
    At that point (line 53, you are trying to resolve an address). My guess is wifi might have dropped out.

    It might be worth in the exception handler checking to see if wifi is still connected, and potentially checking you can resolve the name. If all is good retry, or reconnect wifi etc..

    My feeling is you should expect the link to fail at some point and your code be able to deal with it.



  • @seb

    I used latest urequests.py and changed line 53 to

    ai = usocket.getaddrinfo(host, port)

    I still get the same error

    0_1522124608381_ececda8b-22e7-449c-bccf-06b7e9c99f24-image.png



  • @seb

    This seems like a different version to mine there were only 122 lines in mine, so I updated to this version and got the following error.

    0_1522064565945_12a3bfb0-cc2e-45f2-80c2-3a1ba84264a6-image.png





  • RS232 Weigh Sensor [Rinstrum_2100]

    import network
    import time
    import pycom
    import machine
    import gc
    import urequests

    from network import WLAN

    #INITIALISE LAN
    execfile('/flash/Wi-Fi/Wi-Fi.py') # connect to wifi

    #INITIALISE DEVICE DETAILS
    f_device = open('/flash/Config/Device_Details.txt', 'r') # read device details from file
    # file format is: Device Type, Device Location ie Fridge, Workshop A, Damp Pump
    device_setting = f_device.readline()
    device_strings = [i.strip() for i in device_setting.split(',')]
    f_device.close()

    #INITIALISE LIBRARIES

    gc.enable()
    pycom.heartbeat(False)
    uart1 = machine.UART(1, baudrate=9600, bits=8, parity=None, stop=1)
    time.sleep(2)

    #INITIALISE VARIABLES

    while True:

    tmp = uart1.readall()
    
    res = urequests.post('mywebsite', json={'Weight': str(tmp)})
    res.close()
    if (res.status_code - 200) < 100: # check that response code is in the 200 range
        print("Weight POST Successful")
    

    print("Weight POST Successful - " + str(tmp))

    else:
        print('there was some error')
    gc.collect()
    print(gc.mem_free())
    time.sleep(57)


  • This post is deleted!


  • @jimpower

    You can see here that EBADF means bad file number which would suggest an issue with sockets.

    I tried to match the error above to the code you posted by line 35 is gc.collect(), is the code you posted the same code that causes the issue?

    Edit: And line 112 in urequests is the get function which I dont see anywhere in your code, this is certainly not the same code


Log in to reply
 

Pycom on Twitter