pytrack sample code

[abhishek2101]

@dan
below is the output i am getting

(None, None) - (1970, 1, 1, 0, 2, 13, 827831, None) - 2547456

[dan]

@abhishek2101 for the time, you either have to set it yourself, or sync it with a NTP server (via WiFi or cellular). Are you inside a building? It might take a while (or even fail) to get a location, so I'd recommend trying it outside or near windows

[abhishek2101]

@dan
i am outside on a terrace.

[dan]

@abhishek2101 it might take some time to find a GPS satellite? If the issue persists, let me know and we'll look into it in detail.

[catalin]

hi @abhishek2101, it seems you have a GPS problem. I would recommend:

• leave the pytrack for 30 mins outside, to pick-up the satellites data, as this is a cold-start, could take a while
• check, with a mobile app, how many satellites are visible on your exact position, it could be a glitch

[abhishek2101]

@dan
can you let me know what are below lines doing in the code

l76 = L76GNSS(py, timeout=180)
chrono = Timer.Chrono()
chrono.start()
while (True):

    coord = l76.coordinates()
    print(coord)

[dan]

@abhishek2101

• Set up GPS module
• Start measuring timespan (docs) (but I'm not sure why it's there... It was probably left there by mistake, I'll look into that)
• Always get coordinates

[abhishek2101]

@dan
timeout=180
does this mean that chip will spend 180 sec before locking onto satellites ?

[dan]

@abhishek2101

Set the timeout to a time period (in seconds) for the GPS to search for a lock. If a lock is not found by the time the timeout has expired, the coordinates method will return (None, None).

docs

[abhishek2101]

@dan
mine is set for 180 seconds, that should be enough time to lock onto satellites, right ?

if this time is less, what do you think is the ideal time ?

does this mean that every update happens after 180 seconds, or it the first one only ?

[dan]

@abhishek2101 It's just the timeout for locking onto a satellite, so if after 180 seconds it doesn't find one, it returns None. In the example, we have 30.

It's just for the initialisation. After that, if you have it in a while(True) loop for example, it'll update around every second.

[abhishek2101]

@dan
Mine always return none even after initialising for 300 seconds.

Can you help please ?

[dan]

@abhishek2101 have you tried what @catalin recommended?

@catalin said in pytrack sample code:

hi @abhishek2101, it seems you have a GPS problem. I would recommend:

• leave the pytrack for 30 mins outside, to pick-up the satellites data, as this is a cold-start, could take a while
• check, with a mobile app, how many satellites are visible on your exact position, it could be a glitch

[abhishek2101]

@dan
I will try and report back.

But taking 30 min to lock onto satellites is simply not acceptable. It makes pytrack unusable.

[dan]

@abhishek2101 could you check the GPS coverage at your location? I have tested it here at the office and got the coordinates within a few seconds. I don't think it's a software or hardware issue.

[abhishek2101]

@dan
Google maps on my iPhone shows my location at the same place within few seconds.

[abhishek2101]

@dan
can you share the code you used.

[dan]

@abhishek2101 I'm using our Pytrack example: https://github.com/pycom/pycom-libraries/blob/master/pytrack/main.py

[abhishek2101]

@dan
I am outside with pytrack having access to open sky.

following is the code

from L76GNSS import L76GNSS
from pytrack import Pytrack
py = Pytrack()
l76 = L76GNSS(py, timeout=30)
while (True):

    coord = l76.coordinates()
    print(coord)

still after 20 minutes I only see (none, none).

One only I saw coordinate values but that came in after approx 40 minutes.

How are we suppose to use pytrack if it takes so long to lock onto satellites (that too, not always) or am I missing anything. Please help.

[abhishek2101]

@abhishek2101 said in pytrack sample code:

@dan
I am outside with pytrack having access to open sky.

following is the code

from L76GNSS import L76GNSS
from pytrack import Pytrack
py = Pytrack()
l76 = L76GNSS(py, timeout=30)
while (True):

    coord = l76.coordinates()
    print(coord)

still after 20 minutes I only see (none, none).

One only I saw coordinate values but that came in after approx 40 minutes.

How are we suppose to use pytrack if it takes so long to lock onto satellites (that too, not always) or am I missing anything. Please help.

need to fix this asap, can somebody help.