Is the following a network issue? Can't flash a Gpy with 1.18.1.r3.
For some reason selecting the file manually did the trick. Ran at full speed.
I was referring to the fact that the upgrade tool goes out to the web and gets the firmware file.
Went to down 9600, same result.
To clarify, I did upgrade to 1.18.1.r3 and the Gpy was core dumping when trying to init LTE. So, I rolled back to 1.18.1.r1 and had the same error shown above. Can't flash any version of the firmware now.
robert-hh last edited by
@panda The device is connected via UART, so no network issue. Try a lower baud rate.