New Firmware Release Candidate v1.20.0
@paul-thornton thanks for your answer,
Can i set this value ?
@rogerrr Hi, whilst I can confirm Macfilter/commissioner is on our roadmap but I dont have a timeframe for delivery at the moment.
re current security methods. All mesh traffic is currently encrypted with a pre shared key that matches across all nodes.
When will be able to use macfilter and/or commissioner in cli function ?
Else, is there a way to secure the mesh networks ?
I move back to FAT file system. LittleFS worked fine for some time, but suddenly it was not possible to upload files with the ATOM plugin running Windows 10.
>>> >>> Uploading project (main folder)... Not safe booting, disabled in settings Reading file status Failed to read project status, uploading all files Creating dir lib [1/5] Writing file lib/dth.mpy (2kb) [2/5] Writing file lib/pycoproc.mpy (6kb) Failed to write file, trying again... Failed to write file, trying again... timeout [3/5] Writing file lib/pytrack.mpy (0kb) Failed to write file, trying again... Failed to write file, trying again... timeout [4/5] Writing file lib/sfGPS.mpy (7kb) Failed to write file, trying again... Failed to write file, trying again... timeout [5/5] Writing file main.py (4kb) Failed to write file, trying again... Failed to write file, trying again... Upload failed.: timeout Please reboot your device manually.
The failed to write messages do not pop up always after two files. Sometimes after main.py
I flashed the firmware with erasing the file system flag, it failed.
I flashed again with FAT and it worked.
Flashed 3rd time with LittleFS and failed again.
Maybe a timestamp problem? I had no problems during the afternoon. Time zone is Berlin. Problem started around 20:00 local time.
FTP worked well.
Have you changed someting in _thread or i2c as well?
Maybe it's the updated IDF libraries... I haven't changed anything in the source code related to that functionality.
Have you changed someting in _thread or i2c as well?
up to ec2 I had huge problems with i2c and a pytrack.
Under rc3 it was more stable when serializing i2c with a lock. But deepsleep failed once without visible i2c exception.
Now it runs for some hours without a problem on a LoPy and WiPi3. I hope you have done a great job. Not that I have a lot of bad luck and and miss allways the issue.;)
A new version 1.20.0.rc4 is now available with the following updates:
mods/modusocket: use getaddrinfo() instead of n_gethostbyname() in mod_usocket_getaddrinfo()
esp32/modusocket:Add mpy API to get/set DNS servers ipv4 addr
mods/machrtc: Add optional parameter backup_server to specify two NTP servers
esp32: Fixes in order to get the LoRaWAN US915 certification passing
esp32/frozen: updated MQTTMsgHandler.py
esp32/pycom_config: fix typos
help: Simplify and extend help()
mods/machspi.c: Fix the bug in spi.read()
esp32/micropython: correction to keyboard interrupts exposure
Update IDF libraries to pycom-esp-idf/idf_v3.1 ebff2ed
Fix typo in get_idf_libs.py
Example1: Set primary and secondary (backup) ntp server.
from machine import RTC rtc = RTC() rtc.ntp_sync('pool.ntp.org', backup_server='ntp.ubuntu.com') rtc.synced()
Example2: Check and update name server configuration
import socket # Check configured name servers socket.dnsserver() ==> ('188.8.131.52', '184.108.40.206') # Check primary name server (index: 0) socket.dnsserver(0) ==> (0, '220.127.116.11') # Set primary name server (index: 0) socket.dnsserver(0, '10.0.0.1') # Set secondary name server (index: 1) socket.dnsserver(1, '192.168.1.1') socket.dnsserver(0) ==> (0, '10.0.0.1') socket.dnsserver() ==> ('10.0.0.1', '192.168.1.1')
I've now discovered what looks like a better way to enable the iccid() method to work after a reset.
lte.iccid() does not work
lte.iccid() then works!
My guess is that other methods may not function correctly after a reset() without calling the LTE.reconnect_uart() method, but that is just speculation.
As noted earier after a lte.reset() method call, the lte.iccid() method no longer returns a value.
The sqnsupgrade.info(True) method call resets the modem to a state where the lte.iccid() method returns a correct value.
In other words the sqnsupgrade.info(True) seems to do something to the modem state that lte.reset() does not.
I don't pretend to understand what the ramifications of this are, but I thought it was worth noting. I know of no other software command that will restore the modem to a state where the lte.iccid() method works.
@danielm I don't think it is RAI, but a release indicator flag that ublox has implemented in the socket send command, which tells the modem it can gi to PSM based on the PSM settings.
Nice work! Guess there will be plenty of alternatives when it comes to modems. But, as you say, they must also be a little user friendly.
By release flag you mean RAI - Release Assistance Indicator? 165uWh per active cycle is pretty impressive. I would say on par with LoRa/LoRaWAN based solutions if not better.
Because of the state of cellular support in Pycom products (after they are available on the market for more than a year) yesterday I started to implement similar solution - WiPy 3.0 with Quectel BC66 based on Mediatek MT2625. I do not have any power figures yet as I am currently working on basic library implementation.
If this solution will be working well it will also be pretty cost-efficient and future-proof as the modem also supports Rel.14/NB2.
I would also like to test BC66 with ESP32-WROOM running micropyhton.org ESP32 port which currently implements only basic features but could be suficient for simple sensors. This would lead to even more cost-efficient solution (for simple battery powered devices).
Edit: BC66 contains OpenCPU functionality which allows to run application code directly on the module but development in this environment seems like return to dark ages. Would be worth in case of manufacturing really big series of super-simple devices. The module does not even require voltage regulator when powered directly from battery.
@danielm I've conducted some more testing now. If I enable PSM and eDRX, the commands are accepted the first time after power up. After the deep sleep period, the attach is already there, so the connection and sending of data is as fast as expected. But, when the lte.deinit(dettach=False) runs, I get an OSError. This prevents trying out the deep sleep functionality. (1.20.0.rc3)
The power usage of the LTE-modem is quite high and the GPy is averaging around 200mA for the first run after a power up.
Also, the deinit-method is quite slow. When using PSM, it should be possible to send the socket data with a flag indicating that the modem can release after a successful send, and the deinit-method shouldn't be necessary.
I wrote my own library for a uBlox SARA-N210 breakout module and hooked it up to a LoPy. To handle the deep sleep, I used a PySense and powered the uBlox-modem on the sensor power output.
Using basically the same setup, I'm issuing the same PSM and eDRX commands, but I'm also using a flag when sending the message, telling the modem to release after a successful send.
This gives me some interesting results, and I hope it maybe can work as a benchmark for what results I'm also expecting for the Sequans LTE-modem
The ON-cycle (after the first run when waiting for an initial attach):
Wakeup of the lopy, wakeup of the LTE-modem, sending the data, make the PySense go back to sleep and waiting for the uBlox-modem going back to sleep, takes only 4 seconds and uses around 165uWh. Average power draw is around 36.9mA
The deep sleep cycle:
Getting the expected result of 15.9uA with 11uA draw from the PySense + 4-5uA from the uBlox LTE modem when in PSM mode
@serafimsaudade A fix for this should be in the next RC.
The reset command does not put the modem in the same state that pressing the reset button does.
I'm getting invalid results (blank) from the LTE.iccid() after a modem reset.
@danielm I'm using the GPy. The only way of achieving desired deep-sleep current levels is when i do a "lte.deinit(dettach=True)" and have the GPy alone without any expansion board or PySense/PyTrack
Which module are you using for testing? Can you successfully achieve desired deep-sleep current levels?
Tried again with AT+CPSMS, but it seems to give me an error with the 1.20.0.rc2. On the first run, it works fine, but after waking up from a deep sleep it gives me an exception when calling the deinit() method:
Traceback (most recent call last):
File "main.py", line 90, in <module>
OSError: the requested operation failed
Pycom MicroPython 1.20.0.rc2 [v1.9.4-ecfa670] on 2018-12-17; GPy with ESP32
rtc.synced() continue to return false when rtc.ntp_sync("pool.ntp.org") sync the date&time. I'm using v1.20.0.rc3 built today from source: