lte = LTE() getting stuck after power-on
I have the same issue as described in the post mentionned.
However, the FiPy seems to randomly get stuck on power-on, wether after a electrical reboot or soft reboot.
Here are the version of my Firmwares :
>>> FiPy with firmware version 1.20.0.rc8 Your modem is in application mode. Here is the current version: UE18.104.22.168d LR22.214.171.124-39529
Do you know what might cause the issue and how to resolve it?
Thanks in advance.
Hum well, when the code to create the LTE object was in a different module it was close to 8 in 10.
Now I've decided to put back that part of the code in the main.py and somehow it went closer to 1 in 5.
Most of the time an electrical power-off is enough though now. But it still odd. Could it be that the modem part get 'stuck' in a mode that prevent the LTE object to be created after a soft reboot?
John Baird last edited by
@ArnaudP when you say randomly, how often are we talking about? Is it 1 in 10, or 1 in 10,000?
Same issue here. Are there any known workarounds?
>>> print(lte.send_at_cmd('ATI')) PYCOM FiPy UE126.96.36.199 OK