Need Help to connect NB-IOT 1nce / Germany



  • Hello togehther, I need help.

    I have multiple FiPy Boards with and without expansion board try´d.

    I have used two 1nce SIM-Cards. The cards working good. and its a NB-IOT Contract.
    FiPy Rev. 1.2 RMA from Pycom
    Modem Firmware is already updated to DUP NB1-41019
    LTE-Antenna is connected
    SIM-Card is correctly plugged in.

    i have try multiple NB-IOT connection Scripts. no ones run.
    i have running the script multiple hours inside and outside of the House.

    any Ideas and Hints?

    Sysname: FiPy
    Release: 1.18.2.r3
    Version: v1.8.6-849-a1641ca on 2019-02-28
    Machine: FiPy with ESP32
    Query LTE modem imei... 35434**********
    Query SIM iccid... 89882***************
    Sent to modem: 'ATI1', delay 1000 ms
    UE6.0.0.0
    LR6.0.0.0-41019
    OK
    Sent to modem: 'AT!="showver"', delay 1000 ms
    SYSTEM VERSION
    ==============
      FIRMWARE VERSION
        Bootloader0  : 5.1.1.0 [39529]
        Bootloader1* : 6.0.0.0 [41019]
        Bootloader2  : NA
        NV Info      : 1.1,0,0
        Software     : 6.0.0.0 [41019] by robot-soft at 2018-12-13 21:41:15
        UE           : 6.0.0.0
      COMPONENTS
        ZSP0         : 1.0.99-3171
        ZSP1         : 1.0.98-3170
    OK
    Sent to modem: 'AT!="RRC:setDbgPerm full"', delay 1000 ms
    OK
    Sent to modem: 'AT!="RRC:showcaps"', delay 1000 ms
    == CAPS config =============================
      .Lock UE on SRV band    : false
      .MFBI support           : true
      .TM8 TDD support        : false
    ============================================
    == CAPS ====================================
      . access stratum: R13
      . catM          : 1
      . nb-IoT        : 1
    -- EUTRA bands --
      . supported     : 66/28/26/25/20/19/18/17/14/13/12/8/5/4/3/2/1
      . board         : 1/2/3/4/5/8/12/13/14/17/18/19/20/25/26/28/66
      . admin         :
      . pending admin :
    -- EUTRA carriers --
      . admin         :
      . pending admin :
    ============================================
    OK```


  • This post is deleted!


  • @svonbentzel The first script is the one I uss too for testing and it works. Only I have a different firmware version:
    Pycom MicroPython 1.20.0.rc10 [3911a85-dirty] on 2019-04-17; FiPy with ESP32
    Edit: updated to:
    Pycom MicroPython 1.20.0.rc11 [55accd1-dirty] on 2019-05-24; FiPy with ESP32, same good state.



  • @Elizar Hello, Yes I think ;)

    from network import LTE
    import time
    
    lte = LTE()
    lte.attach(band=8, apn="iot.1nce.net")
    while not lte.isattached():
        time.sleep(0.5)
        print(".", end="")
    
    print("\nAttached!")
    
    print(lte.send_at_cmd("AT+CSQ"))
    
    lte.connect()       # start a data session and obtain an IP address
    while not lte.isconnected():
        time.sleep(0.5)
        print("-", end="")
    
    print("Connected!")
    
    

    Second Script:

    import os
    from network import LTE
    import usocket
    import time
    
    
    def send_at_cmd_pretty(cmd, delay=1000):
        response = lte.send_at_cmd(cmd, delay=delay).split('\r\n')
        print('Sent to modem: \'{}\', delay {} ms'.format(cmd, delay))
        for line in response:
            if line.strip() != '':
                print(line)
    
    
    # Print module details
    un = os.uname()
    print('Sysname:', un.sysname)
    print('Release:', un.release)
    print('Version:', un.version)
    print('Machine:', un.machine)
    
    # Initialize LTE object
    lte = LTE()
    time.sleep(5)
    
    # Pre attaching debugging
    print('Query LTE modem imei...', lte.imei()[:5] + '*' * 10)
    print('Query SIM iccid...', lte.iccid()[:5] + '*' * 15)
    send_at_cmd_pretty('ATI1')
    send_at_cmd_pretty('AT!="showver"')
    send_at_cmd_pretty('AT!="RRC:setDbgPerm full"')
    send_at_cmd_pretty('AT!="RRC:showcaps"')
    time.sleep(5)
    send_at_cmd_pretty('AT+SQNCTM?')
    
    # Attach LTE
    print('LTE attaching...')
    lte.attach(band=8, apn="iot.1nce.net")
    attempts = 0
    while not lte.isattached():
        time.sleep(5)
        attempts = attempts + 1
        print('Attaching...', attempts)
        if attempts % 15 == 0:
            send_at_cmd_pretty('AT+SQNMONI=9')
            send_at_cmd_pretty('AT+CEREG?')
            send_at_cmd_pretty('AT+CFUN?')
            send_at_cmd_pretty('AT+CSQ')
            send_at_cmd_pretty('AT!="showphy"')
            send_at_cmd_pretty('AT!="fsm"')
    print('LTE attach succeeded!')
    
    # Debug attached state
    send_at_cmd_pretty('AT+CEREG?')
    send_at_cmd_pretty('AT+SQNMONI=9')
    send_at_cmd_pretty('AT+CSQ')
    send_at_cmd_pretty('AT!="showphy"')
    send_at_cmd_pretty('AT!="fsm"')
    send_at_cmd_pretty('AT+CGPADDR')
    send_at_cmd_pretty('AT+PING="8.8.8.8"', delay=5000)
    
    # Connect LTE
    lte.connect()
    attempts = 0
    while not lte.isconnected():
        time.sleep(5)
        attempts = attempts + 1
        print('Connecting...', attempts)
    print('LTE connection succeeded!')
    
    # Test DNS
    try:
        usocket.dnsserver(0, '8.8.8.8')
        usocket.dnsserver(1, '1.1.1.1')
        usocket.dnsserver()
        print(usocket.getaddrinfo('www.google.com', 80)[0][-1])
    except Exception:
        print('DNS over NB-IoT failed...')
    
    
    
    # Shutdown LTE
    print("Disonnecting LTE ... ")
    lte.disconnect()
    print("Detaching LTE ... ")
    lte.dettach()
    print("Shuttting down LTE...")
    lte.deinit()
    


  • @svonbentzel Did you setup the AP?
    Something like 'AT+CGDCONT=1,"IP","internet.nbiot.telekom.de"' ?


Log in to reply
 

Pycom on Twitter