Lopy 4 + pysense with GP735
I'm using a lopy4 pysense setup and I want to work with a gps module (GP735)....
what i'm using as pins as the 3v3, GND and then P20 and P19 for RX and TX,
now my problem is that i need to save the battery lifetime of it....
GP 735 has a cutoff pin and i'm only struggling at this moment to find a GPIO pin
that i can use to be the cutoff pin of the gps without messing up the sd card, lora, or any other
If you can give me some advice i would appreciate it Thank you!
rskoniec last edited by
@morrison wouldn’t P9, P10 or P11 work for your purposes?