Cannot detect wipy AP



  • Hi All
    I just received my first wipy 3 and expansion board 3
    I did the firmware update as suggested and all looks well but I cannot see the wipy AP anywhere - I tried several devices
    I found a post suggesting a few things to try in REPL
    Heres my log - but even manually setting the SSID etc - I still cant see the AP. I have even tried disconnecting from USB and running on battery but nothing - any suggestions welcome. Heres the REPL log

    rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
    configsip: 0, SPIWP:0xee
    clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
    mode:DIO, clock div:1
    load:0x3fff8020,len:8
    load:0x3fff8028,len:2176
    load:0x4009fa00,len:19760
    entry 0x400a05bc
    Smart Provisioning started in the background
    See https://docs.pycom.io/smart for details
    Pycom MicroPython 1.20.2.rc3 [v1.11-2037465] on 2020-02-05; WiPy with ESP32
    Pybytes Version: 1.3.1
    Type "help()" for more information.
    Connecting to COM7...

    import pycom
    from network import WLAN
    wlan=WLAN()
    wlan.mode()
    1

    wlan.init()
    wlan.mode()
    1

    wlan.ssid()
    wlan.init(mode=WLAN.AP, ssid='wipy-wlan', auth=(WLAN.WPA2,'www.wipy.io'), channel=7, antenna=WLAN.INT_ANT)
    wlan.ssid()
    'wipy-wlan'

    wlan.mode()
    2



  • I tried reflashing the wipy but this time I unticked
    "enable Pybytes/SmartCofig support"
    and I can see the AP on my PC now

    pycommUpgrade.png


Log in to reply
 

Pycom on Twitter