New firmware release, version 1.6.0.b1

[Neo]

@Daniel I changed the LopY with new one + upgrade to 1.6.3b1 and I ran only your script. Now the output is the same as yours... .but it ALWAYS hanging after the mem displays 400. Here is the output:

Running
Soft resetting the LoPy
Memory 55280
Memory 54720
Memory 54160
Memory 53600
Memory 53040
Memory 52480
Memory 51920
Memory 51360
Memory 50800
Memory 50240
Memory 49680
Memory 49120
Memory 48560
Memory 48000
Memory 47440
Memory 46880
Memory 46320
Memory 45760
Memory 45200
Memory 44640
Memory 44080
Memory 43520
Memory 42960
Memory 42400
Memory 41840
Memory 41280
Memory 40720
Memory 40160
Memory 39600
Memory 39040
Memory 38480
Memory 37920
Memory 37360
Memory 36800
Memory 36240
Memory 35680
Memory 35120
Memory 34560
Memory 34000
Memory 33440
Memory 32880
Memory 32320
Memory 31760
Memory 31200
Memory 30640
Memory 30080
Memory 29520
Memory 28960
Memory 28400
Memory 27840
Memory 27280
Memory 26720
Memory 26160
Memory 25600
Memory 25040
Memory 24480
Memory 23920
Memory 23360
Memory 22800
Memory 22240
Memory 21680
Memory 21120
Memory 20560
Memory 20000
Memory 19440
Memory 18880
Memory 18320
Memory 17760
Memory 17200
Memory 16640
Memory 16080
Memory 15520
Memory 14960
Memory 14400
Memory 13840
Memory 13280
Memory 12720
Memory 12160
Memory 11600
Memory 11040
Memory 10480
Memory 9920
Memory 9360
Memory 8800
Memory 8240
Memory 7680
Memory 7120
Memory 6560
Memory 6000
Memory 5440
Memory 4880
Memory 4320
Memory 3760
Memory 3200
Memory 2640
Memory 2080
Memory 1520
Memory 960
Memory 400
ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:

[Colateral]

@Neo On my LopY I have the same behavior. It is not necessary to iterate until end. Put gc.collect() after that sleep and .... that's it.

[madsdk]

I'm having big FTP stability problems after updating to this version. When I upload stuff it fails about half the time. Anyone else having problems with that? The problem is especially bad when uploading multiple files in one go.

[livius]

@daniel said in New firmware release, version 1.6.0.b1:

could it be that your file system is corrupted from previous firmware versions? Could you try:
import os
os.mkfs('/flash')

to format the file system and start from scratch...
Cheers,
Daniel

formated and tested on 1.6.1.b1 and still file corruption :(
now i am testing 1.6.3
on the left you have oryginal file - on the right corrupted

UPDATE
flashed to 1.6.3
formated and error is same -

but!

It is not visible at start see steps:

1. write e.g. test.py (copy normal onewire content twice to this file on computer)
2. copy this file to wipy throught ftp
3. download it and see if it is ok - yes it is ok
4. disable power (totally)
5. power on wipy
6. connect to it by ftp and download test.py - now it is corrupted

UPDATE2
It looks like it happened not always
after few try storing file and restart i finally have file ok (strange)

[PCA]

I confirm the issue with bluetooth callback disabled in 1.6.0.b1 is solved in 1.6.3.b2.
thanks @daniel

[Neo]

@Daniel On LoPy with 1.6.3.b2 the issue with the gc.collect()/memeory release is till persistent. Please run that test file with the LoRa socket recv and check it.

When do you think that we will have a fix for this? It is CRITICAL from many people point o view.

(sysname='LoPy', nodename='LoPy', release='1.6.3.b2', version='v1.8.6-464-g0f843911 on 2017-02-17', machine='LoPy with ESP32', lorawan='1.0.0')

[daniel]

@Neo I agree it's super CRITICAL. It's on the top of our priorities at this moment. We'll do our best to resolve it ASAP.

Cheers,
Daniel

[JF002]

@Neo said in New firmware release, version 1.6.0.b1:

@Daniel On LoPy with 1.6.3.b2 the issue with the gc.collect()/memeory release is till persistent. Please run that test file with the LoRa socket recv and check it.

When do you think that we will have a fix for this? It is CRITICAL from many people point o view.

(sysname='LoPy', nodename='LoPy', release='1.6.3.b2', version='v1.8.6-464-g0f843911 on 2017-02-17', machine='LoPy with ESP32', lorawan='1.0.0')

I also still have this bug... I was hoping it would be resolved in this update (1.3.6), but it doesn't seem to be the case... Do you want us to fill a bug on github?

Thanks!

[daniel]

@JF002 yes please do report it on Github with a piece of code to reproduce the issue easily (include your boot.py as well if possible). Thanks!

[JF002]

@daniel said in New firmware release, version 1.6.0.b1:

@JF002 yes please do report it on Github with a piece of code to reproduce the issue easily (include your boot.py as well if possible). Thanks!

Here it is :) https://github.com/pycom/pycom-micropython/issues/82

[crankshaft]

@daniel - as you requested, I re-posted my issues / bugs on github duplicating the posts I already made on the this forum, and surprise, surprise, no replies on the github issues either.

I am very disappointed that despite posting my issues, nobody has taken a few minutes to verify / validate or even ask me any questions regarding these issues, I think that you really need to review your priorities.

I have spent the last week porting my code to ESP8266 and I face none of the issues that I posted on this forum regarding guru mediation crashes, intermittent loss of socket connections etc etc etc.

Remember that it takes a long time to develop a good reputation, and very little time to loose it !

:-(

[daniel]

@crankshaft we have seen your issues and we are working on fixing them, but it takes time, the ESP-IDF is in an unstable state which doesn't make things easy.

[crankshaft]

@daniel - someone needs to reply to each issue posted by users, we are not mind readers !

[zmrzli]

This post is deleted!

[stacymarkel]

This post is deleted!