Huge current drain
-
Thank you for this. I got mine yesterday, had real problems doing the initial update and after eventually booting to a python prompt (once) it started going haywire and almost burned out two power supplies while I tried to discover what was going on.
-
@deadpixel could you tell me if you managed to get this fix to work?
-
@robert-hh could you tell me whether, after making this mod, it is still possible to supply the device through the 5v pin or can I only now use the 3.3v pin and whichever way, is it now only safe to use a 3.3v supply?
-
@les-a If you remove the voltage regulator, you MUST supply the device by the 3.3V Pin with an appropriate voltage.
-
@robert-hh Thank you for your help. The VR popped off easily with a sharp craft knife and I now have the python prompt. Just need to figure out why none of my typing is appearing in the putty screen.
-
@les-a If you have upgraded to the latest 1.10.0.b1 firmware, that seems to be a recurring issue. Until a fix is released you'll have to downgrade to the previous version.
-
@jcaron Thanks. Yes, that is the firmware I downloaded yesterday. Just done a factory reset boot and, by George!, normal service is resumed.
-
@les-a The factory reset boot does nothing but to ignore boot.py and main.py. So if you remove boot.py or replace it with an empty on, it should work too. There seems to be a problem with duplicate setting dupterm() on uart0. That happens already in the frozen _boot.py, and sometimes that is also done in boot.py.
-
@robert-hh Thanks, I'll keep that in mind. As this is only day 2 I'm afraid I'm still finding my way around the documentation - so far have used Putty from R-Pi to do stuff to get round the USB problem but not yet ventured into FTP or Tools - unfortunately Atom .deb is only for AMD64 and I'm using 32 ... my heart sinks!
-
@les-a If you stay away from atom+pymakr and stick with putty and ftp tranfer, you'll save yourself a lot of trouble.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login