New firmware release for Pytrack and Pysense version 0.0.8

[catalin]

Hello everyone,

We have released a new firmware for Pytrack and Pysense that can:

• wakeup the PIC on the INT pin (RC1 - P9 - G16), the setup is done using the method setup_int_pin_wake_up()
• when *py board was awaken the approximate remaining time of the sleep can be found out using the method get_sleep_remaining().

As usual, you can get the firmware from here: https://docs.pycom.io/chapter/pytrackpysense/installation/firmware.html

For an example of the newest features, please take a look at the example python script from here: https://github.com/pycom/pycom-libraries/blob/master/examples/accelerometer_wake/main.py
Please note that the python libraries pytrack.py and pysense.py were factorized with pycoproc.py.

Also the pinouts were modified to show PIC RC0 and RC1 pins: https://docs.pycom.io/chapter/datasheets/downloads/pysense-pinout.pdf and https://docs.pycom.io/chapter/datasheets/downloads/pytrack-pinout.pdf.

Have a nice day,
Catalin

[catalin]

Hi @mongkol, so you have this error every time you try to update? Or just once in a while? I would suspect the PC USB port to be the problem, you could:

1. change the USB-microUSB cable
2. use the PC direct USB port, not thru a USB hub;
3. remove other USB peripherals from PC
   The firmware update packages are sent over DFU protocol, which runs over USB bulk transfer channel, it might happen that the CRC of a package was wrong (or delayed).

[Mongkol]

I got this message below . I don't sure my pysense or pysense_0.0.8.dfu or something error

Pls suggest me.

Thank in advance.

[tanmoy_dutta]

Hi @catalin ,
Thanks for the help. It works now !

[catalin]

@tanmoy_dutta
Afik, pycoproc.py have to reside in a directory where python is searching. These are: directory of pytrack.py, /flash and /flash/lib.

Because in pytrack.py there is the next line, and pycoproc has to be searched for:
from pycoproc import Pycoproc

[tanmoy_dutta]

@catalin
Hi Catalin,
I put the required libs in this fashion -

/flash/lib/L76GNSS.py
/flash/lib/LIS2HH12.py
/flash/lib/pytrack.py
/flash/lib/mqtt.py
/flash/lib/pycoproc/pycoproc.py

Do the pycoproc.py and pytrack.py files need to reside on the same path level ?

[catalin]

Hi @tanmoy_dutta

Are you sure pycoproc.py is also in /flash/lib directory (next to pytrack.py)?

rst:0x10 (RTCWDT_RTC_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff9028,len:8
load:0x3fff9030,len:1076
load:0x4009fa00,len:0
ho 12 tail 0 room 4
load:0x4009fa00,len:15380
entry 0x400a0720
MicroPython v1.8.6-849-g0af003a4 on 2017-11-24; LoPy with ESP32
Type "help()" for more information.
>>> from pytrack import Pytrack
>>>
>>> import uos
>>>
>>> uos.getcwd()
'/flash'
>>> uos.listdir('lib')
['pycoproc.py', 'pytrack.py']
>>> py = Pytrack()

[tanmoy_dutta]

@catalin
Firmware successfully upgraded for LoPy, Pytrack and Pysense.
After loading the factorized pytrack.py and pycoproc.py, cannot load/initialize the Pytrack module -

>>> from pytrack import Pytrack
Traceback (most recent call last):
File "", line 1, in 
File "/flash/lib/pytrack.py", line 5, in 
TypeError: cannot create 'module' instances

[han]

@catalin Thanks for your help!
It`s done and works fine again!

[catalin]

Aaah, @han, there is the error on the last line, you don't have the pytrack_0.0.8.dfu file in the same directory as dfu-util-static.exe.
No such file or directory: Could not open file pytrack_0.0.8.dfu for reading

[catalin]

Hi @han,

I've just done the update on Pytrack, on a Win7 machine.

Just to make sure the instructions are correct:

1. power on the pytrack keeping Reset button pressed, and install Zadig libusbk driver (within 7 secs)
2. power on again the Pytrack board keeping Reset button pressed and execute dfu-util-static.exe command (within 7 secs)
3. for another update, the Zadig libusbk doesn't need to be re-installed, so just the 2nd step has to be done

I hope it will work for you!

[han]

Hi Catalin,

I am trying to upgrade the firmware of my Pytrack, but that does not going well.
The Libusbk driver is installed well with the Zadig tool. USB ID is 04D8 F014.
Now i have some struggles with the command prompt action.

I bring the Pytrack in dfu mode en run the command. What then appears is this.

Do you know what i am doing wrongt in these steps?