LoRaWAN ABP example

[bmarkus]

Practically LoRa/LoRaWAN functions are not ducomented. Found nothing about

• how to configure, display, etc. channels used by LoraWAN stack
• how to setup DR, Spreading factor and other parameters
• is there a unique HWEUI available
• how to use ABP
• etc

There is only an incomplete OTA example without channel settings, only the join part shown :(

Can someone provide a complete ABP example?

What is the ETA for a usable, minimal documentation? In the module index nothing about the LoRa functionality in the network module part.

[DarkHawk]

@LoneTech nice, should be easy to use this directly in the auth setup so one doesn't have to hardcode the DevEUI

[bmarkus]

Thanks, it looks the HWEUI. On my board I get a similar value except the different few last digits as expected.

[LoneTech]

Haven't a clue about most of those bits, but I expect there is a unique HWEUI available. For example I found these IDs by introspection:

>>> binascii.hexlify(network.LoRa().mac())
b'70b3d5499a6b6439'
>>> binascii.hexlify(machine.unique_id())
b'240ac400c004'
>>> binascii.hexlify(network.WLAN().mac())
b'240ac400c004'

The LoRa MAC address should be the HWEUI value (it's an 8-byte EUI, whereas the WiFi one is 6-byte).