Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    Socket.bind ignores IP

    Scheduled Pinned Locked Moved Enhancements
    bugsfipysocket.bind2 nics
    1 Posts 1 Posters 628 Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D Offline
      DanielA
      last edited by

      I would like to use LTE for transmitting MQTT messages to TTN.
      The WLAN is used in AP mode to locally serve HTML pages to a tablet for configuration and showing status of the device.

      The LTE class has no function to get the IP address.
      First I create LTE, attach, check and connect.
      To access TTN via MQTT a socket is opened.
      It's opened on the first NIC found.
      Works fine if only LTE is started.

      Now when I start WLAN in AP mode (mode does'nt matter), WLAN registers its NIC, that means it appends to the NIC list.
      From WLAN.ifconfig I get the IP 0:0:0:0 in AP mode.
      Opening a socket links to the LTE NIC, not the WLAN NIC, although providing the IP address to bind to.

      Having a look at the source code in modnetwork.c, function mod_network_find_nic I noticed, that IP address is ignored and just the first NIC with AF_INET is returned.

      If two NIC's with AF_INET are registered, it's not possible to open a socket on the second.
      For selecting the correct NIC the IP address of the LTE is necessary, please add such a function and enhance the code in mod_network_find_nic.
      Thanks

      1 Reply Last reply Reply Quote 0

      Hello! It looks like you're interested in this conversation, but you don't have an account yet.

      Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

      With your input, this post could be even better 💗

      Register Login
      • 1 / 1
      • First post
        Last post

      Pycom on Twitter

      Pycom