Can not connect to my Extension Board/Lopy4
-
Hello
I am trying to upload code into my LoPy4 via the expention board. I could it until I lost connection.I reconnect the USB cable and look at More->Get Serial Port
The only thing I can see it
/dev/cu.iPhonedePierrot-Wireles (copied to clipboard) Connecting on /dev/cu.usbserial-DQ00DAHG...But it can not see my USB port.
What can I do?
I rember, we could reset the board? Isn't?Thank
-
@pierrot10 which model of the expansion board arte you using. Version 2 (one push button) or version 3 (two push buttons). Version 2 is more simple. If you cannot see the serial port, it is a problem of the physical connection (cable, jumpers on the board) or the OS X driver. Version 3 adds to the list of trouble sources the firmware in the PIC controller on the board.
I assume that you also do not get a REPL prompt.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login