Orange Belgium Gpy

[peterv]

So today I managed to get a connection with the NB-1 firmware version 35351, haven't managed with version 37781 though. Here's what I used:

lte = LTE()
def send_at_cmd_pretty(cmd):
    response = lte.send_at_cmd(cmd).split('\r\n')
    for line in response:
        print(line)
send_at_cmd_pretty('AT+CFUN=0')
send_at_cmd_pretty('AT!="clearscanconfig"')
send_at_cmd_pretty('AT!="addscanfreq band=20 dl-earfcn=6400"')
send_at_cmd_pretty('AT!="zsp0:npc 1"')
send_at_cmd_pretty('AT+CGDCONT=1,"IP","nbiot.iot"')
send_at_cmd_pretty('AT+CFUN=1')
while not lte.isattached():
    pass

lte.connect()
while not lte.isconnected():
    pass

DNS doesn't work, but I managed to send some data through MQTT to Adafruit IO using the IP address for io.adafruit.com (as opposed to using the hostname).

[peterv]

@bettina Any news?

[innoguy]

@hadjidgr After some communication with Orange and pycom, I compiled the following list of commands for Orange Belgium (using a Plus SIM card and GPy with NB-IoT modem firmware) but I was not able to make a connection yet:
lte.send_at_cmd('AT+CFUN=0')
lte.send_at_cmd('AT!="clearscanconfig"')
lte.send_at_cmd('AT!="addscanfreq band=20 dl-earfcn=6400"')
lte.send_at_cmd('AT+CGDCONT=1,"IP",”nbiot.iot"')
lte.send_at_cmd('AT+CFUN=1’)
As said, does not work for me (yet), but maybe it helps you.

[Bettina]

@hadjidgr @innoguy We haven't yet certified on Orange Belgium but I will try to find a contact there to help us progress. It may take a good few days before I can come back but I'll keep you posted.

Thanks
Bettina

[innoguy]

Can anyone from pycom answer this question please? I have the same issue.