Eagle schematic/pcb libraries available ?

[PCA]

For a new project, I need Eagle schematic symbol and PCB footprint for LopY and Wipy modules.
Are theses libraries available somewhere ?
Thanks !
Pascal

[Ralph]

Hi @PCA, We don't have any schematics available for our products. We only have the pinouts in the documentation.

[TravisT]

The PDF looks awesome, but could we also have dimensional information.

[livius]

@TravisT
all pins are standard - and compatibile with PCB prototype

[TravisT]

Yes, but by the same logic asking for a Eagle component is irrelevant because he can figure it out himself.

It is pretty typical for a manufacturer to have pinout as well as physical dimensions. Information liek pcb size, location of antennas, keep-out area of metal so that you do not have metal to close to an antenna.

I can take out my calipers and measure this all myself, but if it was in the datasheet then nobody but the one person at Pycom would need to do the extra work, especially since they have the design files.

For example, this is what Adafruit provides for a cellular dev board they make.

I understand the product and documentation is a work in progress, but I think this is a fair request along with the PCB symbols/footprint.

[livius]

@TravisT
Yes, but by the same logic asking for a Eagle component is irrelevant because he can figure it out himself.
you misunderstand me. I agree with your post absolutely. I also need it.
My post was only for help him to start without need to wait for schematic in official documentation.

[TravisT]

@livius
Sorry if my post came off as me being a little short. And I did misunderstand you a little. I appreciate you wanting to help.

I have to design a prototype using the module and was hoping for a quick look at the datasheet, but looks like I will be pulling out the calipers :-)

Thanks

[AntonioValente]

I've made a simple library to do rapid prototype.[0_1483011575045_LoPy.lbr](Uploading 100%)

[livius]

@AntonioValente
for some reason I can not see the file? I am only one? Or someone see it?
is see only text:
(Uploading 100%)

[AntonioValente]

@livius
I think I've not privileges to upload the file.