Pyscan datasheet is completely wrong

[theshade]

Hello Pycom team,
Just to notify that the pyscan pdf spec datasheet is just rubish
if you go to the product page here:
https://docs.pycom.io/datasheets/boards/pyscan.html
and follow the link to the pdf:
https://docs.pycom.io/.gitbook/assets/pyscan-specsheet.pdf

you will find that none of the information including features, pictures, and mechanical dimensions (which is what I was trying to figure out) are anywhere related to the product but are just copy pasted from other datasheets...
Cheers,

[theshade]

Dimensions of the pyscan are actualy 40.25 x 57.00mm x 8.00 for those interested

[Paul Thornton]

Hello.

Thanks, All the pinouts and spec sheets are going through an upgrade at the moment and will be fixed ASAP.

Paul

[theshade]

@paul-thornton Thank you for that...

Specifically I need to make my own intermediate PCB to be able to access the IO connector.
Since it seems they are not on a grid would it be possible to have the coordinates of the connectors addedd to the specs sheets too?
Of course I can probably guesstimate them but it's already difficult enough to insert them when they are perfectly aligned... so..
Thank you!

[Paul Thornton]

@theshade Seems like a logical thing to include. Ill see what I can do :)

[theshade]

Hello @paul-thornton
Any update on the spec sheets or a hint on when "ASAP" could materialise?

[theshade]

Thank you @paul-thornton,

I just saw the addition to the web page with the mechanicals. I'll start drawing my board ;)