Exp Board 3 - Charge LED flash codes
-
Hi all, does anyone have any information (or can point me to any information) regarding the 'flash codes' for the red Charge LED on the Expansion Board 3.
The LED is solid red while the battery is charging most of the time, but on occasions there are instances of the LED flashing - 10 times on/off at approx 1 sec intervals then a long break of several minutes, 1 long flash followed by 6 short flashes and other sequences. What do these mean, how can I capture them to help determine the cause. I have a suspicion that it is linked to the GPY/FiPY LTE reliability issues, but it is very hard to tell. Is it due to something in the PIC programming? Are they error codes? Can I access that LED from the GPY/FiPY code?
Can anyone at Pycom provide some narrative around this behavior?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login