Expansion board 3.1
-
How do I access the 'S1' button? I couldn't find any documentation (actually for the whole board... :( )
Thanks
-
What do you mean by "access"? It is right there on the board...?
But yes, I could not find any documentation either and have issues with the firmware update for the 3.1... -
@Napfkuchen said in Expansion board 3.1:
and have issues with the firmware update for the 3.1...
Thou shall use the firmware for the 3.1 and not the 3.0 board. That's all you can find.
https://docs.pycom.io/pytrackpysense/installation/firmware.html
-
See this thread -- https://forum.pycom.io/topic/4684/exit-from-dfu-mode
I recommend not trying to update the firmware until there's an update from Pycom.
-
Yes, my question was how to find and press the button...
Come on - with access I obviously meant 'how can I read the buttons status?'. Is it connected to an IO? Or does it have another purpose?
-
Sorry I saw the other comments about firmware first.
It's P10.
The documentation could be better of course but FYI you can actually see the trace on the bottom of the PCB.
-
@jimmo - thanks!
-
According to the documentation it's P14 but doesn't seem to work.
It will be P10 but I'm already using that for I2C
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login