How to enable other network after initial setup/firmware update?
-
I have a Lopy4 on a pysense and I've run through the firmware update process onto the pybytes system and got the network selection dialogue. I opted for WIFI and LoRa over OTAA but didn't enable Sigfox as I hadn't set up an SF account at that stage. I figured I would be able to revisit the network setup and enable SF later. Um, not convinced by this assumption now as when I look at the device in pybytes it shows I have WIFI and LoRa enabled but no obvious way to enable SF.
I've gone through the SF registration, PAC codes etc. and have the device showing on the SF site but no traffic. I assume I now have to enable SF on my device in pybytes but how?
Any ideas? Am I missing something obvious?
Cheers
Andy
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login