LoPy Gatewat With Heltec ESP32
-
I have a LoPy Gateway set up on TTN using this tutorial
https://docs.pycom.io/tutorials/lora/lorawan-nano-gateway.html
And i have a ESP32 set up using this tutorial
https://nathanmcminn.com/2018/09/12/tutorial-heltec-esp32-board-the-things-network/
Im having issues getting the ESP32 to connect.
This is the output of the ESP
"Starting Packet queueVHH⸮⸮*Y})=%9%9 5 3001: Unknown event "
-
@jamesbowers remember that the LoPy can only listen on one channel at a time, not several like a real gateway should. You will have to make changes to your client device so it used only the same frequency as the LoPy.
What region are you in?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login