Hidden network issue - Update?

[robi90]

Re: Hidden network issue - not connecting

Hello,

is there any update / timeframe on when / if you add support for wifi networks with hidden ssids in pybytes?

For now I modified my version of pybytes library, to support it, but I hope I don't have to stay seperate for long :)

Kind regards,

Robert

[svonbentzel]

@robi90

Hello, great work! I will implement your solution, test and report.

Many thanks.
If I found a smoother way i will tell you.

But for a workaround - great work! 👍

[robi90]

sure.

So the reason it does not work with hidden networks is, that pybytes library doesn't know what security your wlan uses and therefore does a WLAN().scan() to figure that out.

For that I added another key to the pybytes_config and called it "known_hidden_wlans" (I'm really bad at naming).

{
  ...
  "wifi": {"ssid": "your_ssid", "password": "your_pw"},
  "known_hidden_wlans": [{"ssid": "your_ssid", "sec": INT }]
}

Where INT is one of the following values depending on the security of your wifi:

1 <- WEP
2 <- WPA
3 <- WPA2
5 <- WPA2_ENT

then I edited a few lines in "pybytes_connection.py" on around line 100:

<ins>       hidden_nets = self.__conf.get('known_hidden_wlans') if self.__conf.get('known_hidden_wlans') is not None else []  
<ins>       hidden_ssids = frozenset([x['ssid'] for x in hidden_nets])
            available_nets = self.wlan.scan()
<chg>       nets = frozenset([e.ssid for e in available_nets]) | hidden_ssids
            known_nets_names = frozenset([e[0]for e in known_nets])
            net_to_use = list(nets & known_nets_names)

            try:
                net_to_use = net_to_use[0]
                pwd = dict(known_nets)[net_to_use]
<chg>           sec = ([e.sec for e in available_nets if e.ssid == net_to_use] + [x['sec'] for x in hidden_nets if x['ssid'] == net_to_use])[0] # noqa
                self.wlan.connect(net_to_use, (sec, pwd), timeout=10000)
                while not self.wlan.isconnected():
                    time.sleep(0.1)
            except Exception as e:
                if str(e) == "list index out of range":
                    print("Please review Wifi SSID and password inside config")
                else:
                    print("Error connecting using WIFI: %s" % e)

<ins> symbolizes insert of that line
<chng> an change on that line

Now the "net_to_use" is either one of the scaned wifis or one of the additonal "known_hidden_wlans".

Also after I iplemented that change I thought it would probably be more elegent to add sec as a possible key to the "wifi" key in the original config. And if sec exists there, you could try to connect to it instead of scaning.

EDIT: The only thing I don't really understand is, how can the WLAN().scan() method return a namedtuple although that type is not part of default micropython. It confused me a bit.

[svonbentzel]

@robi90

Hello, can you share your edit lib?
I have the same problem and need to support hidden ssids!