Gpy bricked after adding Pybytes firmware
-
Finally got LTE up and running, thought I'd test out Pybytes, and now I've got bigger problems.
After following the steps here: https://docs.pycom.io/pybytes/connect/quick/ I'm now completely unable to communicate with my Gpy. In Atom, all I see is "Connecting to COM3..." with no way to access REPL. If I try to upload anything, I get "Upload failed: timeout. Please reboot your device manually." If I hit Ctrl+C, nothing happens.
I've attempted safe boot and firmware reset, with no luck. Any suggestions? Sure is a finicky little thing.
-
Fixed this by using the erase all feature from: https://docs.pycom.io/advance/cli/
A little heavy handed but the board seems to be back to normal. I'm pretty afraid to touch pybytes again though. Time to look into alternative for uploading data.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login