Error in the module selection pycom for firmware updating

[Israelsq]

Hello, I bought a SiPY module but when selecting the module type (WiPy 2.0,LoPy,LoPy4,FiPy or SiPy) in firmware update tool I selected wrong type (WIPY).
When I want to update the sipy module , it's select wipy and I cant'n change.

Pycom Upgrade
Result

Your wipy was successfully update.
Version: 1.20.0.rc13 [legacy]
Total time 20.6 seconds

Changed baud rate to 230400
Read 4 KiB from config in 0.16 seconds
Changed baud rate to 921600
File system type set to FatFS
Wrote 28 KiB from bootloader.bin in 1.01 second
Wrote 4 KiB from partitions.bin in 0.12 seconds
Wrote 1.68 MiB from wipy.bin in 17.84 seconds
Booting from partition: factory
Wrote 4 KiB to otadata in 0.12 seconds
Wrote 4 KiB to config in 0.12 seconds
Device ID: XXXXXXXXXXXXX
LoRa MAC: XXXXXXXXXXXXXXXX

I can't get the device ID and PAC to register on the sigfox platform

How can I correct the error?