LTE signal quality detector
-
Hi all,
I have just started with pycom devices and I am having problems sending data to pybytes over LTE (getting the "send message" confirmed but without reception of the data at pybytes). This happens only at certain places in my house, so I am suspecting that signal quality plays a role here.
In order to investigate this I have build a simple "signal quality detector" utility with the FiPy. It blinks green when the signal is like a reference signal which can be calibrated at a given location. When the signal quality drops, the led turns to green/blue tones, when the quality goes up yellow/red tones are displayed.
This tool might prove useful for checking signal availability, for placing your antenna in/on the device, for comparing antennas etc. Give it a try: https://github.com/clausdenk/fipy-ltesignal
PD. Great little devices!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login