Endless reboot
-
Good morning
Flashed the 1.20.2.r4 version and uploaded the nanogateway example yesterday...
Now this morning I see an endless reboot and panic:
AutoConnect enabled, ignoring 'address' setting (see Global Settings) Searching for PyCom boards on serial... Connecting to /dev/ttyACM2... Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1) Core 1 register dump: PC : 0x40097a26 PS : 0x00060034 A0 : 0x80096ce4 A1 : 0x3ffbf4f0 A2 : 0x3ffe2ca4 A3 : 0x00060023 A4 : 0x00000001 A5 : 0x0000cdcd A6 : 0xb33fffff A7 : 0x00000000 A8 : 0x0000cdcd A9 : 0x00000000 A10 : 0x000000aa A11 : 0x0000abab A12 : 0x00000000 A13 : 0x3ffddbb0 A14 : 0x00000000 A15 : 0x3ffddcd8 SAR : 0x00000003 EXCCAUSE: 0x00000006 EXCVADDR: 0x00000000 LBEG : 0x40094664 LEND : 0x4009466f LCOUNT : 0xffffffff Core 1 was running in ISR context: EPC1 : 0x4000bff0 EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x40097a26 ELF file SHA256: 0000000000000000000000000000000000000000000000000000000000000000 Backtrace: 0x40097a26:0x3ffbf4f0 0x40096ce1:0x3ffbf520 0x40089c89:0x3ffbf540 0x40084d15:0x3ffbf580 0x4000bfed:0x3ffddb20 0x40097aed:0x3ffddb30 0x40176e1b:0x3ffddb50 0x400e6b8b:0x3ffddb70 0x400e5cd3:0x3ffddbb0 Core 0 register dump: PC : 0x4009977e PS : 0x00060734 A0 : 0x80098540 A1 : 0x3ffbb970 A2 : 0x3ffe2c7c A3 : 0x3ffbbb28 A4 : 0x3ffbbb0c A5 : 0x00000001 A6 : 0x000000fe A7 : 0x00060023 A8 : 0x3ffbbb28 A9 : 0x00000019 A10 : 0x3ffbbb28 A11 : 0x00000019 A12 : 0xb33fffff A13 : 0x0000cdcd A14 : 0x000000fe A15 : 0x00000000 SAR : 0x0000000a EXCCAUSE: 0x00000006 EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000 ELF file SHA256: 0000000000000000000000000000000000000000000000000000000000000000 Backtrace: 0x4009977e:0x3ffbb970 0x4009853d:0x3ffbb990 0x40096e6b:0x3ffbb9b0 0x4017674e:0x3ffbb9f0 0x400f3056:0x3ffbba10 0x400fa493:0x3ffbba30 0x400d3d85:0x3ffbba50 0x400981b5:0x3ffbba70 Rebooting... ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x16 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff8020,len:8 load:0x3fff8028,len:2128 load:0x4009fa00,len:19760 entry 0x400a05bc Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1) Core 1 register dump: PC : 0x40097a26 PS : 0x00060034 A0 : 0x80096ce4 A1 : 0x3ffbf4f0 A2 : 0x3ffe2ca4 A3 : 0x00060023 A4 : 0x00000001 A5 : 0x0000cdcd A6 : 0xb33fffff A7 : 0x00000000 A8 : 0x0000cdcd A9 : 0x00000000 A10 : 0x000000aa A11 : 0x0000abab A12 : 0x00000000 A13 : 0x3ffddbb0 A14 : 0x00000000 A15 : 0x3ffddcd8 SAR : 0x00000003 EXCCAUSE: 0x00000006 EXCVADDR: 0x00000000 LBEG : 0x40094664 LEND : 0x4009466f LCOUNT : 0xffffffff Core 1 was running in ISR context: EPC1 : 0x4000bff0 EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x40097a26 ELF file SHA256: 0000000000000000000000000000000000000000000000000000000000000000 Backtrace: 0x40097a26:0x3ffbf4f0 0x40096ce1:0x3ffbf520 0x40089c89:0x3ffbf540 0x40084d15:0x3ffbf580 0x4000bfed:0x3ffddb20 0x40097aed:0x3ffddb30 0x40176e1b:0x3ffddb50 0x400e6b8b:0x3ffddb70 0x400e5cd3:0x3ffddbb0 Core 0 register dump: PC : 0x4009977c PS : 0x00060734 A0 : 0x80098540 A1 : 0x3ffbb970 A2 : 0x3ffe2c7c A3 : 0x3ffbbb28 A4 : 0x3ffbbb0c A5 : 0x00000001 A6 : 0x000000fe A7 : 0x00060023 A8 : 0x3ffbbb28 A9 : 0x00000019 A10 : 0x3ffbbb28 A11 : 0x00000019 A12 : 0xb33fffff A13 : 0x0000cdcd A14 : 0x000000fe A15 : 0x00000000 SAR : 0x0000000a EXCCAUSE: 0x00000006 EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000 ELF file SHA256: 0000000000000000000000000000000000000000000000000000000000000000 Backtrace: 0x4009977c:0x3ffbb970 0x4009853d:0x3ffbb990 0x40096e6b:0x3ffbb9b0 0x4017674e:0x3ffbb9f0 0x400f3056:0x3ffbba10 0x400fa493:0x3ffbba30 0x400d3d85:0x3ffbba50 0x400981b5:0x3ffbba70 Rebooting... ets Jun 8 2016 00:22:57
Even when reflashing and erase the flash this error persists...
Any ideas?
thanks in advance
richard
-
@tuftec Okay..thanks...
Switched to LFS now....let's see if it is more stable...
But still it can't connect to the things network...
-
@davorin maybe try using LFS instead of FAT!!!
-
Ah had to erase the FatFS as well....
Seems somehow my LopY4 gets corrupted when running....well...have to buy something else then...