Setting up a single channel for connection to the gateway

[Benjamin Mavinga]

Hi,

I am planning to build a single channel gateway using the Lora Hat and Raspberry Pi 3 to send values from my Lopy4 to TTN. I've found a program from a tutorial but the person that programmed it lives in the states(USA).

How can I modify this program so I can use it in my area?
Any insights to this will help a lot and I'm open to hearing any suggestions
Thank you.

#Setup the single channel for connection to the gateway 
for channel in range(0, 72): 
   lora.remove_channel(channel) 
for chan in range(0, 8): 
   lora.add_channel(chan,  frequency=freq,  dr_min=0,  dr_max=3)

[Gijs]

The code you mention should work for a Lopy4.. Im not really sure what you're after here?

[Benjamin Mavinga]

@Gijs I was trying to modify it to work in my country but I see now all I have to do is to find out how many available LoRa channels there are in then country and place it where " 72 " is.

[robert-hh]

@Benjamin-Mavinga Which region code are you using?