LOPY4 with Pygate - Gateway set up on Pycom Chirpstack
-
I have been trying to set up my gateway on Pycom's ChirpStack server. There is a good write up on how to set up a gateway using TTN but information seems to be lacking for the ChirpStack server. In the Config file, what should be the server address? what ports should be used? I see others have asked on the forum but there was no resolution... Appreciate any guidance, Thanks. Again this is for the ChirpStack sever at loraserver.pycom.io.
-
Thanks for the help again. I disabled pybytes on boot and downgraded to the current stable firmware. It's running now.
-
@Gijs awesome. thanks for the quick response! I will give it a go and let you know how I fair.
-
Please use loraserver.pycom.io as the server address, instead of mqtt.pybytes.pycom.io :)