Light Sleep
-
How high is the Lopy4s' power consumption in light sleep mode? I could not find it in the documentation. Could i use this machine.pin_sleep_wakeup(pins, mode, enable_pull), (taken from here https://docs.pycom.io/firmwareapi/pycom/machine/#machine-deepsleep-time_ms) so that it wakes up whenever the sensor gives a low logic level?
-
@Anders-H according to https://forum.pycom.io/topic/3351/new-development-firmware-release-v1-19-0-b1/18 it should be around 3.5 mA.
So one order of magnitude lower than staying on, but two orders of magnitude higher than deep sleep.
There are few applications which have a use case for light sleep, but there are probably some (mostly if you need faster wake up than deep sleep but don’t have battery life requirements measured in months or years).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login