LoPy 4 - Deep Sleep high current consumption? 412uA

[Rasmus Persson 0]

I'm having trouble with getting my LoPy 4 down to the specified 50uA during deep sleep. As of now I get an average of 412uA. I don't know why.

from machine import Pin
import time
from network import LoRa
from network import WLAN
from network import Bluetooth
from network import Server
# from network import MDNS
import socket
import ubinascii
import pycom
import machine
from machine import Timer
from network import Sigfox


intervalforlora = 10 # in seconds
# MDNS.deinit()
wlan = WLAN()
wlan.deinit()
bt = Bluetooth()
bt.deinit()
server = Server()
server.deinit() # disable the server




buttonPin = Pin('P8', mode=Pin.IN, pull=True)
buttonPin2 = Pin('P9', mode=Pin.IN, pull=True)

lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868, tx_power=14, sf=12, power_mode=LoRa.TX_ONLY)



app_eui = ubinascii.unhexlify('XXXXXXXXXXXXXX')
app_key = ubinascii.unhexlify('XXXXXXXXXXXXXXXXXXXXXXXXXXXXX')
dev_eui = ubinascii.unhexlify('XXXXXXXXXXXXXX') 

lora.join(activation=LoRa.OTAA, auth=(dev_eui, app_eui, app_key), timeout=0)

chrono = Timer.Chrono()
chrono.start()

lora.nvram_restore()


while not lora.has_joined() or chrono.read() <= intervalforlora:
    pycom.heartbeat(True)
    starttime = time.time()
    time.sleep(2.5)
    print('Not yet joined...')
if chrono.read() >= intervalforlora and not lora.has_joined():
	machine.reset()

print('Joined')
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)

s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)

pycom.heartbeat(False)


while True:
    s.setblocking(True)
    print()
    s.send(bytes([buttonPin()]))
    s.setblocking(False)
    time.sleep(10)
    
    print(buttonPin(),buttonPin2())

    # deepsleep
  
    if buttonPin() == 1:
        machine.pin_sleep_wakeup(["P9"], mode=machine.WAKEUP_ANY_HIGH, enable_pull=True)
        machine.deepsleep(1000*3600*24)  # 24 hours
    else:
        machine.pin_sleep_wakeup(["P8"], mode=machine.WAKEUP_ANY_HIGH, enable_pull=True)
        machine.deepsleep(1000*3600*24)  # 24 hours

Any help with solving this mystery would be greatly appreciated!

[Rasmus Persson 0]

Could this be caused by having 2x 10k resistors connected to 3v3?