Difficulties / tricks in soldering connectors on LiPo
-
I was greedy and bought old LiPos a year ago in the “PILOTAZH” that sells them, moreover, they had already run out of running connectors, they were left with small cylindrical ones. Well, okay, I thought, I'm soldering.
A surprise for me was the material of the wires, the feeling that they are iron with fiber. color dark grey. They had to be bitten off from the connectors, because they were crimped, the diameter is healthy, and they are soldered only with acid, and even then not very willingly.
Is it like that for everyone? Or just old ones. big on 4s 5000mah I resoldered leaving 1/2 of the wire on the XT60 connector. 1800 are still untouched.
Question: what kind of material is it, with what it needs to be soldered, or are there special connectors for crimping?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login