user button configuration

[assia]

I want to print a msg when i press a user button on the pycom board,
but i get about 92 msgs when i press the button only once !

import machine

button=machine.Pin("G17",  machine.Pin.IN,  machine.Pin.PULL_UP)

while(True):
    if(button.value()==0):
        print("presssss !!!!")

How can i configure the button so that when i press once only i get a single output(msg)

thanks

[livius]

@assia
look here
https://forum.pycom.io/topic/588/interrupt-button-debounce-with-long-short-press

[RobTuDelft]

Quick solution is to use pull_up resistor like you did and create empty while loop when value is 0.
Then after releasing the button add a small delay, ~100 ms will do. Then add futher statements after the delay.

[assia]

thanks @RobTuDelft It worked well