FSK and RX2 Windows

[jubbs]

Hi have a channel plan that I need to match in the 868 spectrum and I am a bit confused about how to set the FSK and RX2 channels. Below is the Channel plan that I need to match and the channels that I have setup. Does anyone have any advice?

Jubbs

Channel Frequency (MHz) Bandwidth (kHz) Sp Factor / Data Rate
0 864.8625 125 12-7 / 0-5
1 865.0625 125 12-7 / 0-5
2 865.4025 125 12-7 / 0-5
3 865.6025 125 12-7 / 0-5
4 865.9850 125 12-7 / 0-5
5 866.2000 125 12-7 / 0-5
6 866.4000 125 12-7 / 0-5
7 866.6000 125 12-7 / 0-5
LoRa 865.0625 250 7 / 6
FSK 865.0625 125 50 kbps

RX2 window: 866.5500 MHz, DR4 (SF8)
Max power: 36 dBm
Coding rate: 4/5

def __init__(self, dev_addr, nwk_swkey,  app_swkey):
    lora = LoRa(mode=LoRa.LORAWAN, adr=True, public=True, tx_retries=3, tx_power=14)
    lora.add_channel(0, frequency=864862500, dr_min=0, dr_max=5)
    lora.add_channel(1, frequency=865062500, dr_min=0, dr_max=5)
    lora.add_channel(2, frequency=865402500, dr_min=0, dr_max=5)
    lora.add_channel(3, frequency=865602500, dr_min=0, dr_max=5)
    lora.add_channel(4, frequency=865985000, dr_min=0, dr_max=5)
    lora.add_channel(5, frequency=866200000, dr_min=0, dr_max=5)
    lora.add_channel(6, frequency=866400000, dr_min=0, dr_max=5)
    lora.add_channel(7, frequency=866600000, dr_min=0, dr_max=5)
    lora.add_channel(8, frequency=865062500, dr_min=6, dr_max=6)
    lora.remove_channel(9)
    lora.remove_channel(10)
    lora.remove_channel(11)
    lora.remove_channel(12)
    lora.remove_channel(13)
    lora.remove_channel(14)
    lora.remove_channel(15)

    self.lora = lora
    self.dev_addr = dev_addr
    self.nwk_swkey = nwk_swkey
    self.app_swkey = app_swkey
    self.mac = binascii.hexlify(lora.mac())
    self.join()