Pycom Cases - 3D models
-
Do you have STL or OBJ files of your cases? If you do, is there a chance to share with the community?
-
Hi, I also wanted a simple box to at least mount the aerials nicely, so I threw together a box for the exansion board and the LoPy last night. Does the job (though need to enlarge the aerial holes by 0.5mm with a 6mm drill). I'm now printing a slightly smaller variant for the pysense an fipy board (though any board on the pysense should fit fine). Both STL files attached, hope this helps.
[0_1514009179619_pycom expansion board box.stl](Uploading 100%) [0_1514009184323_pycom pysense board box.stl](Uploading 100%) -
Oh.. seems I can't attach stl files to the forum it only accepts pictures.
-
@grantkassell
put it on github ;-)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login