Simple Windows installation

[pmulvey]

@robert-hh

# test
import os

import network
import time
from machine import UART
uart = UART(0, 115200)
os.dupterm(uart)
# setup as a station
wlan = network.WLAN(mode=network.WLAN.STA)

wlan.connect(ssid="SKYFXXXX", auth=(network.WLAN.WPA2, "XXXXXXXX"))

while not wlan.isconnected():

    time.sleep_ms(50)
wlan.ifconfig(config=("192.168.0.29", "255.255.255.0", "192.168.0.1",  "192.168.0.1"))

print ("Booted in STA mode")```

[pmulvey]

@robert-hh On a soft reboot (CTRL-D) boot.py seems to hang on this line:
wlan = network.WLAN(mode=network.WLAN.STA) and I just get this response:
PYB: soft reboot
ÿ

But on the reset it works fine. Can I run main.py from REPL without a soft reboot? I have to explain here that I am new to both micropython and sipy but have done loads with arduino.

[robert-hh]

@pmulvey I do not see a reason for the difference, but I execute the piece of code for setting up the network interface from main.py. Actually it is in a separate file, let's call it "setup_wifi.py", and I have a statement
import setup_wifi
in main.py. It is usual practice to make main.py simple and to put you application code into separate files, which are then imported in main.py, eventually enclosed in a try/except clause. That way the device comes up in a stable state, even if you code flags errors.

[jeffkdanies]

Help me create a bootable USB, I want to install Windows 10 on my system. From where should I download the iso file.