Threading example

[robmarkcole]

Hi all, am developing a Wipy multisensor, I want to have a PIR sensor running on a background thread pinging an MQTT message when it registers motion, whilst performing other periodic sensor readings on the main thread (or vice-versa I suppose). Does anyone have a good example of this?
Cheers
Robin

[robmarkcole]

This post is deleted!

[livius]

@robmarkcole
no, your link is for pyboard

here you have example from docs

from machine import Pin

def pin_handler(arg):
    print("got an interrupt in pin %s" % (arg.id()))

p_in = Pin('P10', mode=Pin.IN, pull=Pin.PULL_UP)
p_in.callback(Pin.IRQ_FALLING | Pin.IRQ_RISING, pin_handler)

for pycom doc is here
https://docs.pycom.io/pycom_esp32/library/machine.Pin.html#machine.Pin

[robmarkcole]

@bucknall Hi Alex, thanks for the advice, you are referring to https://docs.micropython.org/en/latest/pyboard/reference/isr_rules.html#isr-rules
? If you know of any examples that could get me started that would be a great help, as this appears quite advanced.
Cheers

[bucknall]

Hi @robmarkcole,

Would using an interrupt on the PIR sensor pin be a potential solution? You could then run your main code loop and have your MQTT message sent any time that the interrupt is triggered?