TTN LoraWan GW not 100% stable
-
Hi everyone,
I'm experiencing issues with the LoraWan GW TTN code provided in the example, the GW crashes after several hours. When I reset the GW is seen again and I cannot find the route cause. (My LoPy is updated to latest firmware). Is there someone in the community that is running a TTN GW lopy based that is super stable ? -
I experience this problem yesterday after 2 hours. . I thought this was an isolate problem.
-
@blackansible said in TTN LoraWan GW not 100% stable:
his was an isolate problem.
I will continue to investigate to find the route cause, maybe someone at pycom can help?
-
Mine isn't stable either, but more like crashing (showing up as disconnected on TTN) once every couple of days, maybe a week or so. Since I use it for development, it wasn't / isn't really an issue.
Don't know about options to add logging to the micropython script on the server so at least we can get a better idea of what it causing the disconnection. -
@PiAir
Remote logging would be excellent but unfortunately once it crashes all remote stuff is off the table.In my case I'm using an OpenLog https://www.sparkfun.com/products/13712 (actually a clone) to record the serial output from the LoPy to an SD card.
-
@jmarcelino OK I will try this in order to get more information when a crash is happening. To what I've seen I'm not the only one having similar issues.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login