Additional I2C device on pytrack
-
One of my Lopy's is connected to an expensionboard. It was possible for me to connect a SSD1306 OLED to view some data while not connected to my computer.
For my other Lopy connected to a Pytrack i can't find the way how to connect another device to the ic2 ports via de external io-ports. What is the proper way to accomplish this?
-
@kringloper As far as I can see in the documentation https://docs.pycom.io/pycom_esp32/pycom_esp32/datasheets.html#pytrack, there is the external IO connector, and at least P9, P10 and P11 are available at that connector, as well as 3.3V Vcc and GND. You may use these for an I2C display
-
Thanks for the input. However, i already did use P9 en P10 for buttons. I'm using the pytrack for a movable cache (geocaching) and need some more user interaction than - probably - normaly would be used with an iot-device.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login