Pysense / pytrack
-
Hello
I cannot see anything in the docs about the spots for soldering that is accessible from the bottom of the shields. What are they used for? I2C? GPIO?
Another question... Is there any particular reason that the pysense / pytrack has a PIC processor built into it? Why isnt the sensors just connected to the Lopy?
-
See https://docs.pycom.io/pycom_esp32/pycom_esp32/datasheets.html Chapter 5.4 and 5.5
-
@tholden About the PIC processor, see the discussion at https://forum.pycom.io/topic/1022/root-causes-of-high-deep-sleep-current
-
@tholden
PIC should also be able to wake up the Pycom board from deepsleep for example if movement is detected by the accelerometer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login