IMPORTANT: New Firmware Update Tool Released (version 1.1.2.b1)
-
Works ok here on Linux Mint 18.1 64 bit
´´´
os.uname()
(sysname='WiPy', nodename='WiPy', release='1.7.7.b1', version='v1.8.6-715-g5fa16c2c on 2017-07-20', machine='WiPy with ESP32')´´´
-
@daniel Did you find any specific issue with Update Tool 1.1.2.b1 on Ubuntu?
-
@robert-hh exactly the same for me on Ubuntu: Changing baud rate to 921600 - Failure!
-
Same issue on ubuntu: cannot update LoPy/SiPy anymore...
-
Hello everyone,
Thanks for reporting this issue with the linux updater. We haves just fixed it and released version 1.1.2.b2 for unix. It's available here:
Apologies for the inconveniences...
Cheers,
Daniel -
@daniel tried it, got a little bit further, up to the message:
" Something failed trying to contact the server." -
@robert-hh can you please try again? The issue reported before was caused because of the slow baudrate (38400) used before for the initial connection with the board. Increasing it to 57600 fixed it. We just trying again on our Ubuntu machines where it was failing before and now it's all fine.
@Emmanuel-Goudot @b3da @rdixey could you please try and let me know? Thanks!
-
@daniel 1.1.2.b2 worked on my Ubuntu 16.04 Thanks....
-
@daniel Now it works.
-
@daniel It works, report 1.7.7.b1
os.uname()
(sysname='LoPy', nodename='LoPy', release='1.7.7.b1', version='v1.8.6-715-g5fa16c2c on 2017-07-20', machine='LoPy with ESP32', lorawan='1.0.0') -
LoPy update fails on WIN10 (64-bit). Connecting to the device with a serial terminal using 115200 bit/s I see
rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for downloadbut the PyCom updater fails to connect.
Updater is just downloaded as 1.1.2.b1
Version number is not displayed in the updater and clicking on '?' in the upper right corner nothing happens. It looks like there is no way to get installer version.
-
Update was succesful on another WIN10 machine.
-
Why doesn't the update tool support OTA updates, or at least make the firmware binaries available directly?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login