LoRaWAN DR6/DR7 (EU868)
-
Using default EU868 channel allocation with firmware 1.7.8.b1 DR6 uplink is using SF12 / 125kHz. dr_max setting is unknown for these channels, but expected dr_min=0 dr_max=5 an exception would be better in this case than using an unexpected SF/DR.
Adding the DR6 channel DR6 uplink works as expected:
lora.add_channel(6, frequency=868300000, dr_min=6, dr_max=6)
DR7 is not implemented at all. While it is randomly used, it is defined in the LoRaWAN specification, gateways support it as well as the radio modem in the LoPy. Would be good to have in a later firmware release.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login