Pytrack / Pysense board firmware licence?
-
What are the license conditions for Pytrack / Pysense and other board firmware? Is there a plan to make it open source and available in GitHub?
-
@bmarkus
All sources and license are here
https://github.com/pycom -
Can you be more specific? I do not find it.
-
@bmarkus The source for the firmware si here:https://github.com/pycom/pycom-micropython-sigfox and especially in the ESP32 subdirectory. The code for Pytrack/Pysense is here:https://github.com/pycom/pycom-libraries
The license is here for Pytrack/Pysense: https://github.com/pycom/pycom-libraries/tree/master/license
The license for the code is typically in the header of each source file. -
I suspect bmarkus is referring to the PIC16 firmware on the Pysense/Pytrack which enables deep-sleep, wake on interrupt and other things.
From what I understand the source of that firmware will not be available.
-
@jmarcelino I recall the opposite. Somewhere it was asked whether the PIC source code would be published too, and the answer by @daniel was "yes". At least, this link let's assume it: https://forum.pycom.io/topic/1022/root-causes-of-high-deep-sleep-current/22
-
@jmarcelino said in Pytrack / Pysense board firmware licence?:
I suspect bmarkus is referring to the PIC16 firmware on the
Yes, I mean the PIC fw. It was referred somewhere as PIC10xxx
-
@bmarkus
The deepsleep shield is a PIC10, the Pysense/track use a PIC16 (for the USB stack I'd imagine)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login