If been developing a BLE app for controlling a LoPy. After leaving the system running over the weekend I found this error message on the console.
ASSERT_PARAM(512 0), in rwble.c at line 222
Any ideas what might cause this or where the source file is located? I searched the pycom/sigfox github but didn't locate that particular file.
Is anything happening with this bug. Every LoPy I update to 1.7.9 now crashes with this error. It wouldn't be as big of an issue if Pycom would let us select which firmware to flash on the board.
Thanks for that!
jmarcelino last edited by
Known problem in the low level ESP-IDF