WiPy 2.0 with GPRS SIM800



  • Hi all

    While I wait for the release of FiPy, I would like to do a router using a SIM800 connected through the UART1 to WiPy2.0, so the wiPy use the WiFi as AP and the SIM800 to have internet access for the clients connected to the AP.

    I don't have any problem with the SIM800 using AT commands, but I don't know how "through" instructions, like ntp library, using the UART1 where I have connected the SIM800.
    (Use PPP or LwIP through SIM800)

    I have the SIM800 in transparent mode, so It is no neccessary to use the AT Commands.

    Any help?

    Thanks so much


 

Hello World?

Pylife on Kickstarter - November 2018








Back Us On Kickstarter >

Pycom on Twitter