"resource not available" when assigning P9 / G16 as ADC
After much headache I discovered this post (https://forum.pycom.io/topic/313/lopy-pin-out/3)
where one user says that it's possible to find the correlation between chip pins and expansion board pins with a REPL command.
And so I found out that P9 on the chip is G16 on the expansion board and this pin should have ADC capability.
So I wrote in my code:
adc = machine.ADC()
sensorPin = adc.channel(pin="P9")
But it keeps throwing a "OSError: resource not available" on that second line. I did import machine.
What is this supposed to mean? That P9 is not G16 after all, or despite this diagram (https://docs.pycom.io/chapter/datasheets/downloads/lopy-pinout.pdf) saying that P9 has ADC, it does not? Or that some other feature on this port prevents me from using it?
EDIT: after making sure I wasn't using ADC2 ( the ones on the left side), I got rid of this error for some time. Now it's come back, and it doesn't matter which pin I use: ADC is just not available as a resource, and I'm getting no clue what so ever as to why this is..
@robert-hh yes, sorry i know - I have been trying with the following pins with that code i send you now: "13, 14, 15 and 23". 13, 14 and 15 is adc1.
I think maybe I understand the problem a tiny bit better now:
it happens only when I'm doing a soft reset. When I do a hard reset, it works again. Is this because a soft reset doesn't free up the pins maybe?
robert-hh last edited by robert-hh
@soren P23 belongs to ADC2 ..... You should write P14, or G4, like you state in the comment
soren last edited by
Hi robert, as far as I can tell - I'm doing the same thing as you.. here is my code, it's on line 9 ("sensorPin = adc...) it reports this error:
import machine from machine import Pin import time import pycom from machine import ADC from machine import PWM adc = machine.ADC() sensorPin = adc.channel(pin='P23', attn=ADC.ATTN_11DB) # G4 on expansion board ledArray = [0x7f0000, 0x007f00, 0x0000ff] # red, green, blue step_p = Pin('P8', mode=Pin.OUT) stepDir_p = Pin('P21', mode=Pin.OUT) class ColorSensor: dosingPump_p = Pin('P21', mode=Pin.OUT) dosingPump_p.value(0) # SERVO: pwm = PWM(0, frequency=50) servo_p = pwm.channel(0, pin='P22', duty_cycle=0.127) servo_p.duty_cycle(0.107) # 0.107 # upright position # 0.03 # pouring position balanceSet = False colourArray = [0, 0, 0] whiteArray = [0, 0, 0] blackArray = [0, 0, 0] avgRead = 0 def checkBalance(self): print("checking balance") if not self.balanceSet: self.setBalance() def setBalance(self): print("setting balance") time.sleep(5) for num in range(0, 3): # set white bal print(num) pycom.rgbled(ledArray[num]) # set to color time.sleep(0.1) self.getReadings(5) self.whiteArray[num] = self.avgRead print('avgRead from bal ', self.avgRead) pycom.rgbled(0x000000) # turn off led time.sleep(0.1) time.sleep(5) for num in range(0, 3): # set black bal pycom.rgbled(ledArray[num]) time.sleep(0.1) self.getReadings(5) self.blackArray[num] = self.avgRead pycom.rgbled(0x000000) # turn off led time.sleep(0.1) self.balanceSet = True time.sleep(5) def checkColour(self): print("rinsing...") for num in range(0, 3): # rinse glass 3 times dosingPump_p.value(1) # take in water from aquarium time.sleep_ms(500) # how much water to take in? dosingPump_p.value(0) # turn off dosing pump time.sleep(1) servo_p.duty_cycle(0.03) # pour out water time.sleep(4) servo_p.duty_cycle(0.107) # turn back glass time.sleep(4) print('rinsing finished! Taking in water...') dosingPump_p.value(1) # take in water from aquarium time.sleep_ms(500) # how much water to take in? dosingPump_p.value(0) # turn off dosing pump time.sleep(1) print('taking plunger down...') for num in range(0, 201): # take plunger down step_p.value(1) time.sleep_ms(500) step_p.value(0) time.sleep_ms(500) # check if plunger is all the way down and break ? print('plunger is down! Waiting for analysis...') time.sleep(1) # set to 3 minutes print('analysis ready! Reading colours...') for num in range(0, 3): pycom.rgbled(ledArray[num]) # set to color time.sleep(0.1) self.getReadings(5) self.colourArray[num] = self.avgRead print('whitearray ', self.whiteArray[num], ' blackArray ', self.blackArray[num]) greyDiff = self.whiteArray[num] - self.blackArray[num] print('greydiff: ', greyDiff) self.colourArray[num] = (self.colourArray[num] - self.blackArray[num])/(greyDiff)*255 pycom.rgbled(0x000000) # turn off led time.sleep(0.1) def printColour(self): print('printing colour') return self.colourArray, self.colourArray, self.colourArray def getReadings(self, times): reading = 0 tally = 0 for num in range(0, times+1): reading = sensorPin() print('reading ', reading) tally = reading + tally time.sleep(0.01) self.avgRead = (tally)/times print('avgRead ', self.avgRead) #print('avgRead ', avgRead)
robert-hh last edited by
@soren Are sou sure? I can do it here.
import machine adc = machine.ADC() sensorPin = adc.channel(pin="P14")
@jmarcelino so now I'm also getting this error from ADC1 pins... P14, to be precise
soren last edited by
@jmarcelino thank you very much for chiming in. i'm baffled why this isn't stated in capital letters on the official pinout diagrams
jmarcelino last edited by
The ADC2 pins are not available from Python, at least for the time being. You can only use ones starting with ADC1_...