LoRa Problem with 1.10.2.b1 FW

[ssmith]

When I upgrade my FW from 1.9.2 to 1.10.2.b1 LoRa Raw communication fails. My LoRa setup is:

  "lora": {
    "mode": "LORA",
    "frequency": 918000000,
    "power_mode": "ALWAYS_ON",
    "tx_power": 20,
    "bandwidth": 125,
    "sf": 9,
    "preamble": 8,
    "coding_rate": "4_8",
    "tx_iq": false,
    "rx_iq": false
  }
}

s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
s.setblocking(False)

The only change is the FW. I can downgrade it to 1.9.2 and all starts working again. I tried both LoPys at 1.10.2 and still nothing. Has anything changed in 10.2 that would affect this?

Steve

[ssmith]

Just no LoRa ints getting through. Found a discussion on github about adding a 50mS delay in the while loop of the main program and now I am getting packets through. I need to understand the interrupt processing better. It should break out of a tight while loop with an interrupt but seems like it doesn't. I also had to add a sleep delay after boot before loading our BT code or the device would core dump with this version of code.

Here's the link: https://github.com/pycom/pycom-micropython-sigfox/issues/102

[jmarcelino]

Hi @ssmith
Can you explain in more detail what exactly is failing?

Thanks.