UART with nanogateway?
-
Re: Lopy nano gateway transmits data via UART
how we can make this work using nanoGW and uart as backhaul instead of WiFi , I have Pi or equivalant running the loraserver so i just need to forward the data from nanoGW to pi using UART
-
@gas
uart is simplest possible comunication
https://docs.pycom.io/chapter/firmwareapi/pycom/machine/UART.htmlremember about voltage - pycom boards are 3V3 and 5 voltage can damage it.
-
thanks but i was looking for how you can use it instead of Wifi forwarding he messages that normally are forwarded through Wifi to loraserver using Uart
i think i'll need to design also a process on the other side to read uart and push it to loraserver
I'll try to do it and see
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login