lora.nvram example needed
luc hanneuse last edited by
I've searched for some functioning example of lora.nvram and found none. Can someone send one ?
It's absolutely needed for deepsleep function.
goldfishalpha last edited by
I know this is an old post but for me this is still an issue.
Any may of learning more about the specifics would be very much appreciated e.g what does
Should I see somthing in the REPL?
>>> lora.nvram_save() >>> l= pycom.nvs_get('lora') >>> print(l) None
Am I going about this in completely the wrong way?
tuftec last edited by
@luc-hanneuse did you manage to solve this issue.
I have a similar problem.
I have place the lora.nvram_restore() after my lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.AU915) command. This seems like the logical place to put it.
However after waking from sleep a few times, it appears that restore does not work correctly.
I am also having problems making the app_eui and app_key available for use between different functions (def) within the same file/module. I am using global app_eui, app_key in both functions but I get an error after waking with app_eui undefined!!!! Any ideas??
han last edited by
@livius I also appreciate it when there comes a working example for the using of the nvram and restore function.
Everybody at the forum is from do this but by the most of us it isn`t working either.
luc hanneuse last edited by
That's what I'm doing.
It's just a bit illogical for me, I've to try 5 or 6 different codes to find a working one. The place of the
lora.nvram_restore()isn't obvious ... If I place it just after the
lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)then it's not working !
My working example :
print("deepsleep prog") from network import LoRa import socket import binascii import struct import time import utime #utime init_timer = time.time() # Initialize LoRa in LORAWAN mode. lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868) # create an ABP authentication params dev_addr = struct.unpack(">l", binascii.unhexlify('00 00 00 00'.replace(' ',''))) nwk_swkey = binascii.unhexlify('000000000000000000000000000000000') app_swkey = binascii.unhexlify('000000000000000000000000000000000') print("start join LoRa") print(utime.localtime())#utime print(utime.time())#utime # join a network using ABP (Activation By Personalization) lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey)) # create a LoRa socket s = socket.socket(socket.AF_LORA, socket.SOCK_RAW) # set the LoRaWAN data rate s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5) lora.nvram_restore() #strange place for the restore but working. # make the socket blocking # (waits for the data to be sent and for the 2 receive windows to expire) s.setblocking(True) while(True): print(".") # save the coordinates in a new variable coord = l76.coordinates() # verify the coordinates received if coord == (None, None) and time.time() < 200: print("Getting Location...") pycom.rgbled(0x7f7f00) #jaune print(utime.time())#utime continue # send the Coordinates to LoRA print("sending") pycom.rgbled(0x0000ff) #bleu s.send(struct.pack("<i", int(coord*100000))+struct.pack("<i", int(coord*100000))+struct.pack("<H", int(utime.time()))) time.sleep(1) lora.nvram_save() #nvram print("sent") print(time.time()) print(utime.localtime())#utime print(utime.time())#utime pycom.rgbled(0x000000) #sleep print("sleep") py.setup_sleep(600 - time.time()) py.go_to_sleep()
If someone has something smarter with an ABP connection, help me.
jcaron last edited by
It's quite simple... When you boot,
lora.nvram_restore(). Before you go to sleep,
luc hanneuse last edited by luc hanneuse
I read the documentation.
I need a full example.
I've a written a code and I tried to use those functions lora.nvram_save() and lora.nvram_restore() . But it doesn't seem to work. The "counter" of LoRaWan message reset.
livius last edited by
@luc-hanneuse said in lora.nvram example needed:
alway look into official documentation. There is
if you need save some custom information use