lopy received data into text conversion
how to convert lopy lora received data into text.
@jcaron Rx_iq set to False. if i set it True, lopy does not receive any data.
how can i set sampling rate?
@seb import ubinascii
from network import LoRa
from machine import Pin
lora = LoRa(mode=LoRa.LORA, frequency=868000000, tx_power=14, bandwidth=LoRa.BW_250KHZ, sf=8, preamble=8, coding_rate=LoRa.CODING_4_8, power_mode=LoRa.ALWAYS_ON, tx_iq=False, rx_iq=False, adr=True, public=True, tx_retries=1, device_class=LoRa.CLASS_A)
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
data = s.recv(64)
print("Received data: "+"\n1",data)
jcaron last edited by
You may want to check if changing rx_iq helps.
Can you share your code so I can get a better understanding of what is going on
This post is deleted!
@seb Raw LoRa
@seb when i send using UDP socket, i dont receive anything.
but when i send using file souce with 'Hello mitcoe' at hundreds of lines, it receives some things like this
matt gr lora
Are you using LoRaWAN or raw LoRa?
@seb Thank you for reply.
I am receiving 'Hello mitcoe' message from USRP B200 in gnuradio by using matt gr lora transmitter with udp socket source.
We are going to need more details about the format of the incoming data before we can help you out