Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    GPy with Hologram.io SIM

    Scheduled Pinned Locked Moved GPy
    hologram.io
    100 Posts 10 Posters 42.8k Views 12 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ChrisGammellC Offline
      ChrisGammell @jmarcelino
      last edited by

      @jmarcelino no, it still doesn't attach, unfortunately

      >>> lte.attach()
      >>> lte.connect()
      Traceback (most recent call last):
        File "<stdin>", line 1, in <module>
      OSError: modem not attached
      

      Don't want to usurp the other issues that @tlanier is having, but curious to understand why the other steps are necessary. Were those necessary with a Verizon SIM?

      J 1 Reply Last reply Reply Quote 0
      • J Offline
        jmarcelino @ChrisGammell
        last edited by jmarcelino

        Hi @chrisgammell ,

        Can you try again without calling lte.attach() please?

        I'm trying to avoid any wrong/missing assumptions lte.attach() is doing so the code I posted should replace that entire step, if you call lte.attach() again after that you'll effectively undo the parameters we set via custom AT commands and ask the modem to reattach with the problem settings.

        If you see "+CEREG: 2,5,... this means the modem is attached and lte.isattached() should return true (even if you didn't use lte.attach()...)

        It should then be ready to connect (start the PPP session) via lte.connect()

        Being certified by Verizon means we must include a specific configuration for them inside the modem - it's what CID=3 does - which sets everything correctly for them including APN, bands and a lot of other stuff they require... this was done in tight collaboration with them by the modem manufacturer so we don't need these manual configuration steps.

        1 Reply Last reply Reply Quote 0
        • ChrisGammellC Offline
          ChrisGammell
          last edited by

          @jmarcelino ah, that makes sense. Sorry, I should have explained I tried doing the attach command again after I noted that the lte.connect() function did not function properly. It still throws an error. Here is the entirety of the code I'm using:

          import socket
          import ssl
          import time
          from network import LTE
          
          def pretty(cmd):
              response = lte.send_at_cmd(cmd).split('\r\n')
              for line in response:
                  print(line)
          
          lte = LTE()         # instantiate the LTE object
          
          pretty('AT+CGDCONT=1,"IP","hologram"')
          
          pretty('AT+CFUN=0')
          pretty('AT+SQNCTM="verizon"')
          
          pretty('AT+CGDCONT=1,"IP","hologram"')
          pretty('AT+CEREG=2')
          pretty('AT+CFUN=1')
          
          pretty('AT!="showinit"')
          
          while not lte.isattached():
              time.sleep(1)
              pretty('AT!="showphy"')
              pretty('AT!="fsm"')
              pretty('AT+CEREG?')
          
          
          lte.connect()
          while not lte.isconnected():
              time.sleep(1)
          print("Connected!")
          
          

          And I still get the following response:

          0_1523551242826_Screenshot 2018-04-12 11.40.07.png

          I believe the connect function isn't working because the modem is still not attached.

          1 Reply Last reply Reply Quote 0
          • ChrisGammellC Offline
            ChrisGammell
            last edited by

            Ah, and re-reading, I saw I should check on "lte.isattached()" which in my case returns true:

            0_1523551425502_Screenshot 2018-04-12 11.43.31.png

            So is the lte.connect() function the problem here Or are there other hints of what I should be trying?

            J 1 Reply Last reply Reply Quote 0
            • J Offline
              jmarcelino @ChrisGammell
              last edited by

              Thank you so much @chrisgammell That is really crucial "field" information for us!

              From a quick look it seems AT+CGDATA is timing out but maybe we just don't give it enough time to complete. I'll check with our LTE team.

              Thanks again

              T 1 Reply Last reply Reply Quote 0
              • T Offline
                tlanier @jmarcelino
                last edited by tlanier

                @jmarcelino

                Have any conclusions been reached about the connection problem?

                Possibilities:

                • Coverage problem?
                  I've tried in multiple locations in my town of 35,000. We've contacted Verizon and they indicate that CAT-M1 coverage is everywhere that 4G LTE CAT-1 coverage is at. Also, since Chris is in Chicago and is also having trouble leads me to think that coverage is not the problem. Tonight I will take the device to a larger town to see if I have the same connection problem.

                • SIM card issue?
                  Is it possible that the Hologram SIM card is somehow incompatible with the GPy? Would some other SIM card from another vendor possibly work?

                • GPy firmware issue?
                  Is it possible that the GPy has a firmware issue that can be corrected? When we update the firmware to the GPy does that update both the MicroPython firmware and the cell modem firmware also?

                • GPy hardware issue?
                  Is it possible that the GPy isn't compatible with current Verizon CAT-M1 service?

                Thanks for any insights you may have concerning the problem.

                J 1 Reply Last reply Reply Quote 0
                • J Offline
                  jmarcelino @tlanier
                  last edited by jmarcelino

                  @tlanier
                  I understand you concern but there is no incompatibility with SIMs or hardware issues. The modem has been certified by and works correctly with Verizon and for them (with a Cat M1 SIM) you can just do

                  lte = LTE(carrier=“verizon”)

                  and everything is setup correctly. For other configurations including MVNOs like Hologram we still need to do some manual tuning on the current modem firmware. This will no doubt improve as certification and firmware work continues.

                  The modem firmware is separate from the MicroPython code. Currently the only way to update the modem firmware is loading from SD card using this tool: https://github.com/pycom/pycom-libraries/tree/master/lib/sqnsupgrade . This will also be much simplified in the near future.

                  Regarding your specific case Chris was seeing +CEREG: 2,5 which means the modem actually found and registered on the network, the issue he had was with connect (establishing the PPP session).

                  However you got +CEREG: 2,4 which means the modem did not find a network to connect, this suggests to me there is coverage issue and it would be interesting to know if you get a different result elsewhere.

                  N T 2 Replies Last reply Reply Quote 0
                  • N Offline
                    nathanh @jmarcelino
                    last edited by

                    @jmarcelino said in GPy with Hologram.io SIM:

                    However you got +CEREG: 2,4 which means the modem did not find a network to connect, this suggests to me there is coverage issue and it would be interesting to know if you get a different result elsewhere.

                    For what it is worth and not trying to take this off the current topic/carrier. But from my attempts at trying to use my FiPy on Telstra where I am under full coverage, I also get the 2,4 result from CEREG but it will also sometimes connect (for a time before it crashes). I have left my modem in the same spot all day and it appears totally random if I can connect or not. Even when I connect, I will force a disconnect or reboot my FiPy and try and reconnect and next attempt will typically result with a 2,4 from CEREG even though less than 20 seconds earlier I was connected and sending JSON data off to my server.

                    J 1 Reply Last reply Reply Quote 0
                    • T Offline
                      tealbrains
                      last edited by tealbrains

                      @nathanh I got it to connect to Telstra thanks to @micksta and his other post. But it breaks after that. I would suggest to @tlanier to configure the LTE with some commands, otherwise it does not know what to do. See the code below (modification of @micksta 's):

                      [sorry about the format, the "Insert Code Block" button does not work for me] Edit: thanks @tlanier I fixed it.

                      #import os
                      #os.mkfs('/flash')
                      
                      import time
                      import socket
                      import gc
                      from network import LTE
                      import ssl
                      
                      def send_at_cmd_pretty(cmd):
                          response = lte.send_at_cmd(cmd).split('\r\n')
                          for line in response:
                              print(line)
                      
                      
                      print('Starting LTE...')
                      lte = LTE() # instantiate LTE object
                      print('LTE instantiated')
                      time.sleep(4.0)
                      
                      if lte.isattached():
                          #important, otherwise it can get stuck
                          lte.disconnect()
                          lte.dettach()
                          print("LTE was still attached. Disconnecting it.")
                      
                      
                      lte.reset()
                      print ('LTE has been reset')
                      time.sleep(5.0)
                      
                      send_at_cmd_pretty('AT+CGDCONT=1,"IP","telstra.internet"')
                      print ('APN set') 
                      time.sleep(1.0)
                      
                      send_at_cmd_pretty('AT!="addscanfreq band=28 dl-earfcn=9410"') # lte frequency band - from forum
                      print ('Chose frequency band') 
                      time.sleep(1.0)
                      
                      send_at_cmd_pretty('AT+CFUN=1') # Set the full functionality mode with a complete software reset
                      print ('Writing configuration...') 
                      time.sleep(1.0)
                      
                      print('LTE initialised')
                      
                      #show wireless parameters
                      send_at_cmd_pretty('AT!="showphy"')     # get the PHY status
                      send_at_cmd_pretty('AT!="fsm"')         # get the System FSM
                      
                      print("Attaching...")
                      lte.attach() # attach the cellular modem to a base station
                      while not lte.isattached():
                          time.sleep(0.25)
                      print ('Attached!') 
                      
                      print("Connecting...")
                      lte.connect() # start a data session and obtain an IP address
                      while not lte.isconnected():
                          time.sleep(0.25) 
                      print ('Connected!') 
                      
                      #LTE Connection established
                      print("LTE is working")
                      
                      s = socket.socket()
                      addr_info = socket.getaddrinfo('httpbin.org', 80)
                      addr = addr_info[0][-1]
                      
                      print(addr)
                      s.connect(addr)
                      print("socket is ready")
                      
                      s.send(b"GET / HTTP/1.0\r\n\r\n")
                      print(b"GET / HTTP/1.0\r\n\r\n")
                      print("Sent GET request")
                      
                      print(s.recv(4096))
                      print("Received something")
                      
                      lte.disconnect()
                      lte.dettach()
                      s.close()
                      gc.collect()
                      
                      T 1 Reply Last reply Reply Quote 0
                      • T Offline
                        tlanier @tealbrains
                        last edited by

                        @tealbrains said in GPy with Hologram.io SIM:

                        Thanks for the input.

                        I think the trick to get the code to be properly formatted is to surround it with with three back-ticks (key to left of the "1" key). See a better description at (https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet) under the section titled "Code and Syntax Highlighting".

                        Looking at your code I'm not sure what I should use for the send_at_cmd_pretty('AT!="addscanfreq band=28 dl-earfcn=9410"') command. That looks like a region specific setting.

                        1 Reply Last reply Reply Quote 0
                        • T Offline
                          tlanier @jmarcelino
                          last edited by

                          @jmarcelino

                          One interesting piece of information is that the AT+CFUN=0 or AT_CFUN=1 commands do not return an "OK" response from the modem. The commands configure the control of the LED according to the manual.

                          1 Reply Last reply Reply Quote 0
                          • J Offline
                            jmarcelino @nathanh
                            last edited by jmarcelino

                            @nathanh said in GPy with Hologram.io SIM:

                            For what it is worth and not trying to take this off the current topic/carrier. But from my attempts at trying to use my FiPy on Telstra where I am under full coverage, I also get the 2,4 result from CEREG but it will also sometimes connect (for a time before it crashes).

                            For Telstra/Australia you need to set the correct EARFCN (with 'AT!="addscanfreq band=28 dl-earfcn=9410"'). For the US the modem knows the Verizon network already so you don't need to.

                            @tlanier said in GPy with Hologram.io SIM:

                            One interesting piece of information is that the AT+CFUN=0 or AT_CFUN=1 commands do not return an "OK" response from the modem. The commands configure the control of the LED according to the manual.

                            I'm not sure which manual you're following but on the one we provide CFUN is definitely used to enable/disable the radio: see "2.4 Set Phone Functionality: +CFUN:".

                            N T 3 Replies Last reply Reply Quote 0
                            • N Offline
                              nathanh @jmarcelino
                              last edited by

                              @jmarcelino said in GPy with Hologram.io SIM:

                              For Telstra/Australia you need to set the correct EARFCN (with 'AT!="addscanfreq band=28 dl-earfcn=9410"'). For the US the modem knows the Verizon network already so you don't need to.

                              Which is what we are using and documented in the several Telstra posts on the forum and are still waiting on you/Pycom to refer back from meeting with Telstra as @daniel indicated on this thread (https://forum.pycom.io/topic/2769/telstra-lte-cat-m-working-on-fipy-just/21)

                              My point was that while the report of 2,4 from CEREG typically indicates no coverage, the actual reason according to the documentation is unknown error and even if it was lack of coverage it did not make sense since I could also get connectivity randomly in the same location with the same device, and the signal strength reporting as good/excellent when it did connect. Which in my mind could potentially indicate other issues with how the modem itself communicates on different networks.

                              1 Reply Last reply Reply Quote 0
                              • T Offline
                                tlanier @jmarcelino
                                last edited by

                                @jmarcelino
                                Sorry, my mistake. I was reading the description of the AT+SQNLED=<mode> command (see below) and thought it was describing the purpose of the AT+CFUN command instead of describing how the LED behaved with the different CFUN values.

                                From manual:

                                This command configures the control of light of a connected LED. The mode
                                setting is persistent after reboot.
                                The LED is turned on only when AT+CFUN=1 or 4. It is turned off when
                                AT+CFUN=0.
                                LED is steadily turned on when the ME is registered to the network and either
                                awake or in power saving state. LED flashes when the ME is registered to the
                                network and either awake or in power saving state. In this mode, the duration
                                of flashing means various states, listed below:
                                • AT+CFUN=0 or 4. The ME is stopped or in Airplane mode. The LED is
                                permanently turned off.
                                • AT+CFUN=1. LTE PS data transfer. The LED is permanently turned on.
                                • AT+CFUN=1. The ME is registered to a network, No call, no data transfer
                                (in RRC Idle). The LED blinks (typically 1280 ms on, 3840 ms off).
                                • AT+CFUN=1. Limited Network Service (no SIM, no PIN, network search).
                                The LED blinks (typically 500 ms on, 500 ms off).
                                • AT+CFUN=1. The ME is in deep SLEEP (eDRX or PSM). The LED is permanently
                                turned off.

                                1 Reply Last reply Reply Quote 0
                                • T Offline
                                  tlanier @jmarcelino
                                  last edited by tlanier

                                  @jmarcelino
                                  Below is the code I'm going to use in the GPy plugged into my car USB port. The LED will show me the attach/connection state. This evening I plan to drive to multiple locations to see if I can make it work.

                                  import pycom
                                  import socket
                                  import ssl
                                  import sys
                                  import time
                                  from network import LTE
                                  
                                  # send AT command to modem and display response
                                  def at(cmd):
                                      print("modem command: {}".format(cmd))
                                      response = lte.send_at_cmd(cmd).split('\r\n')
                                      for line in response:
                                          print(line)
                                  
                                  #####################################################################
                                  print("CAT M1 Test - V0.2")
                                  
                                  print("disable MicroPython contorl of LED")
                                  pycom.heartbeat(False)
                                  pycom.rgbled(0xFFFFFF)  # White
                                  
                                  print("instantiate LTE object")
                                  lte = LTE(carrier="verizon")
                                  print("delay 4 secs")
                                  time.sleep(4.0)
                                  
                                  if lte.isattached():
                                      print("LTE was already attached, disconnecting...")
                                      lte.disconnect()
                                      lte.detach()
                                      print("resetting modem...")
                                      lte.reset()
                                      print("delay 5 secs")
                                      time.sleep(5.0)
                                  
                                  # using hologram SIM
                                  at('AT+CGDCONT=1,"IP","hologram"')
                                  
                                  # enable network registration and location information unsolicited result code
                                  # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
                                  at('AT+CEREG=2')
                                  
                                  print("full functionality level")
                                  at('AT+CFUN=1')
                                  time.sleep(1.0)
                                  
                                  print("attempt to attach cell modem to base station...")
                                  lte.attach()
                                  i = 0
                                  while not lte.isattached():
                                      i = i + 1
                                      print("not attached: {} secs".format(i))
                                  
                                      if (i % 2 == 0):
                                          pycom.rgbled(0xFF0000)  # Red
                                      else:
                                          pycom.rgbled(0x000000)  # Off
                                  
                                      # get EPS Network Registration Status:
                                      # 0 - not registered
                                      # 1 - registered, home network
                                      # 2 - not registered, but searching...
                                      # 3 - registration denied
                                      # 4 - unknown (out of E-UTRAN coverage)
                                      # 5 - registered, roaming
                                      at('AT+CEREG?')
                                      time.sleep(1)
                                  
                                  print("connect: start a data session and obtain an IP address")
                                  lte.connect()
                                  i = 0
                                  while not lte.isconnected():
                                      i = i + 1
                                      print("not connected: {}".format(i))
                                  
                                      if (i % 2 == 0):
                                          pycom.rgbled(0x00FF00)  # Green
                                      else:
                                          pycom.rgbled(0x000000)  # Off
                                  
                                      time.sleep(1.0)
                                  
                                  pycom.rgbled(0x0000FF)  # Blue
                                  
                                  s = socket.socket()
                                  s = ssl.wrap_socket(s)
                                  s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
                                  s.send(b"GET / HTTP/1.0\r\n\r\n")
                                  print(s.recv(4096))
                                  s.close()
                                  
                                  lte.disconnect()
                                  lte.dettach()
                                  
                                  # end of test
                                  print("end of test")
                                  pycom.rgbled(0xFFFF00)    # Yellow
                                  
                                  while True:
                                      pass
                                  
                                  
                                  J T 2 Replies Last reply Reply Quote 0
                                  • J Offline
                                    jmarcelino @tlanier
                                    last edited by jmarcelino

                                    @tlanier

                                    I'm afraid the manual is written by Sequans (who make the modem) and is more of a general guide for all possible implementations.

                                    The LED on the FiPy/GPy is only connected to the ESP32/MicroPython and not to the modem. The SQNLED command will have no effect.

                                    The correct way to check for correctly registration is via AT commands and specifically the status check AT+CEREG? Valid registration stats are 2,1 or 2,5 (for MVNOs)

                                    T 1 Reply Last reply Reply Quote 0
                                    • T Offline
                                      tlanier @jmarcelino
                                      last edited by

                                      @jmarcelino

                                      Thanks, I've updated the code.

                                      1 Reply Last reply Reply Quote 0
                                      • T Offline
                                        tlanier @tlanier
                                        last edited by

                                        @tlanier
                                        I took the Gpy 50 miles down Interstate 85 through West Point, GA and Opelika, AL. The device never attached to a cell tower during the entire trip.

                                        J 2 Replies Last reply Reply Quote 0
                                        • J Offline
                                          jmarcelino @tlanier
                                          last edited by

                                          @tlanier
                                          Were you using the code you posted below? I didn't notice you had changed the code you to calling lte.attach() again. Have you been doing the other tests with this?

                                          For setups like Hologram where you do a custom init you need to remove lte.attach() and use AT+CEREG=2 and AT+CFUN=1 manually.

                                          As you already have those in the code you need to remove lte.attach() otherwise it will cause problems.

                                          T 1 Reply Last reply Reply Quote 0
                                          • T Offline
                                            tlanier @jmarcelino
                                            last edited by

                                            @jmarcelino

                                            Thanks for catching the misunderstanding!

                                            Here's my revised code. The at(cmd) function has been improved to return the modem response as a list making it easier to parse. I've also added logic to break on <tac> = 1 or 5 just in case the isattached() function is not working.

                                            I will take the GPy north towards Atlanta today and see if I can connect there.

                                            import pycom
                                            import socket
                                            import ssl
                                            import sys
                                            import time
                                            from network import LTE
                                            
                                            # send AT command to modem and return response as list
                                            def at(cmd):
                                                print("modem command: {}".format(cmd))
                                                r = lte.send_at_cmd(cmd).split('\r\n')
                                                r = list(filter(None, r))
                                                print("response={}".format(r))
                                                return r
                                            
                                            #######################################################
                                            print("CAT M1 Test - V0.3 - 4/15/18")
                                            
                                            print("disable MicroPython control of LED")
                                            pycom.heartbeat(False)
                                            pycom.rgbled(0xFFFFFF)  # White
                                            
                                            print("instantiate LTE object")
                                            lte = LTE(carrier="verizon")
                                            print("delay 4 secs")
                                            time.sleep(4.0)
                                            
                                            if lte.isattached():
                                                print("LTE was already attached, disconnecting...")
                                                lte.disconnect()
                                                lte.detach()
                                                print("resetting modem...")
                                                lte.reset()
                                                print("delay 5 secs")
                                                time.sleep(5.0)
                                            
                                            # enable network registration and location information, unsolicited result code
                                            at('AT+CEREG=2')
                                            
                                            print("full functionality level")
                                            at('AT+CFUN=1')
                                            time.sleep(1.0)
                                            
                                            # using Hologram SIM
                                            at('AT+CGDCONT=1,"IP","hologram"')
                                            
                                            print("attempt to attach cell modem to base station...")
                                            # lte.attach()  # do not use attach with custom init for Hologram SIM
                                            
                                            i = 0
                                            while True:
                                                # get EPS Network Registration Status:
                                                # +CEREG: <stat>[,[<tac>],[<ci>],[<AcT>]]
                                                # <tac> values:
                                                # 0 - not registered
                                                # 1 - registered, home network
                                                # 2 - not registered, but searching...
                                                # 3 - registration denied
                                                # 4 - unknown (out of E-UTRAN coverage)
                                                # 5 - registered, roaming
                                                r = at('AT+CEREG?')
                                                r0 = r[0]  # +CREG: 2,<tac>
                                                r0x = r0.split(',')     # ['+CREG: 2',<tac>]
                                                tac = int(r0x[1])       # 0..5
                                                print("tac={}".format(tac))
                                            
                                                if lte.isattached():
                                                    print("Modem attached (isattached() function worked)!!!")
                                                    break
                                            
                                                if (tac==1) or (tac==5):
                                                    print("Modem attached!!!")
                                                    break
                                            
                                                i = i + 1
                                                print("not attached: {} secs".format(i))
                                            
                                                if (i % 2 == 0):
                                                    pycom.rgbled(0xFF0000)  # Red
                                                else:
                                                    pycom.rgbled(0x000000)  # Off
                                            
                                                time.sleep(1)
                                            
                                            print("connect: start a data session and obtain an IP address")
                                            lte.connect()
                                            i = 0
                                            while not lte.isconnected():
                                                i = i + 1
                                                print("not connected: {}".format(i))
                                            
                                                if (i % 2 == 0):
                                                    pycom.rgbled(0x00FF00)  # Green
                                                else:
                                                    pycom.rgbled(0x000000)  # Off
                                            
                                                time.sleep(1.0)
                                            
                                            
                                            pycom.rgbled(0x0000FF)  # Blue
                                            
                                            s = socket.socket()
                                            s = ssl.wrap_socket(s)
                                            s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1])
                                            s.send(b"GET / HTTP/1.0\r\n\r\n")
                                            print(s.recv(4096))
                                            s.close()
                                            
                                            lte.disconnect()
                                            lte.dettach()
                                            
                                            # end of test, Red LED
                                            print("end of test")
                                            pycom.rgbled(0xFFFF00)  # Yellow
                                            
                                            while True:
                                                pass
                                            
                                            T 1 Reply Last reply Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 4 / 5
                                            • First post
                                              Last post

                                            Pycom on Twitter

                                            Pycom